Processor Support; Table 3. Processor Support Matrix - Intel SE7525GP2 Technical Manual

Technical product specification
Hide thumbs Also See for SE7525GP2:
Table of Contents

Advertisement

Functional Architecture
3.1.6

Processor Support

The server boards are designed to support one or two Intel
800 MHz front side bus with frequencies starting at 2.8 GHz. Previous generations of Intel Xeon
processors are not supported on either of these server boards.
The server board is designed to provide current up to 120 A per processors. Processors with
higher current requirements are not supported.
®
Note: Only Intel
Xeon
these server boards. See the table below for the supported processors.
Processor Family
Intel
Intel Xeon
Intel Xeon
Intel Xeon
Intel Xeon
Intel Xeon
Intel Xeon
Intel Xeon
Intel Xeon
Note: The latest BIOS needs to be implemented before to have new Intel
supported on these server boards.
See the Supported Processors List located on the support website for a complete list of
supported processors.
http://support.intel.com/support/motherboards/server/se7320sp2
http://support.intel.com/support/motherboards/server/se7525gp2
3.1.6.1
Processor Mis-population Detection
The processors must be populated in the correct order for the processor front side bus to be
correctly terminated. CPU socket 1 must be populated before CPU socket 2. Server board logic
will prevent the system from powering up if a single processor is present but it is not in the
correct socket. This protects the logic against voltage swings or unreliable operation that could
occur on an incorrectly terminated front side bus.
If processor mis-population is detected when using the standard onboard platform
instrumentation, the mBMC will log an error against processor 1 to the system event log and the
server board hardware will light both processor error LEDs.
12
®
processors that support an 800-MHz front side bus are supported on

Table 3. Processor Support Matrix

FSB Frequency
®
®
533 MHz
Xeon
533 MHz
533 MHz
800 MHz
800 MHz
800 MHz
800 MHz
800 MHz
800 MHz
Intel® Server Boards SE7320SP2 and SE7525GP2
®
®
Xeon
processors utilizing an
Frequency
Support
2.8 GHz
No
3.06 GHz
No
3.2 GHz
No
2.8 GHz
Yes
3.0 GHz
Yes
3.2 GHz
Yes
3.4 GHz
Yes
3.6 GHz
Yes
3.8 GHz
Yes
®
®
Xeon
processors
Revision 4.0

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Se7320sp2

Table of Contents