Memory Error Codes; Intel ® Light-Guided Diagnostics; Table 70. Memory Error Codes - Intel SE7525GP2 Technical Manual

Error Reporting and Handling
6.3.8

Memory Error Codes

Tpoint
001h
002h
0E1h
0E2h
0E3h
0E4h
0E5h
0E6h
0E8h
0E9h
0EAh
0EBh
0ECh
0EDh
0EEh
0EFh
0F0h
0F1h
0F2h
0F3h
0F4h
®
6.4 Intel Light-Guided Diagnostics
The server board provides system fault/status LEDs in many areas of the board to alert users to
a particular failure or status of a component on the board. There are fault LEDs for the memory
DIMMs and processors, and status LEDs for 5-volt stand-by and system state.
140
Intel® Server Boards SE7320SP2 and SE7525GP2

Table 70. Memory Error Codes

Description
MEM_ERR_CHANNEL_B_OFF
(DIMM mismatch forced Channel B disabled)
MEM_ERR_CK_PAIR_OFF
(Slow DIMM(s) forced clock pair disabled)
MEM_ERR_NO_DEVICE
(No memory installed)
MEM_ERR_TYPE_MISMATCH
MEM_ERR_UNSUPPORTED_DIMM
(Unsupported DIMM type)
MEM_ERR_CHL_MISMATCH
MEM_ERR_SIZE_MISMATCH
MEM_ERR_ECC_MISMATCH
MEM_ERR_ROW_ADDR_BITS
MEM_ERR_INTERNAL_BANKS
MEM_ERR_TIMING
MEM_ERR_INST_ORDER_ERR
MEM_ERR_NONREG_MIX
MEM_ERR_LATENCY
MEM_ERR_NOT_SUPPORTED
MEM_ERR_CONFIG_NOT_SUPPORTED
SYS_FREQ_ERR
(Flag for Unsupported System Bus Freq)
DIMM_ERR_CFG_MIX
(Usupported DIMM mix)
DQS_FAILURE
(indicates DQS failure)
MEM_ERR_MEM_TEST_FAILURE
(Error code for unsuccessful Memory Test)
MEM_ERR_ECC_INIT_FAILURE
(Error code for unsuccessful ECC and Memory Initialization)
Revision 4.0