Functional Architecture Overview
3.1
Processor Support
The server board includes two Socket-R (LGA2011) processor sockets and can support one or
two of the following processors:
®
®
Intel
Xeon
Power (TDP) of up to 135W.
®
®
Intel
Xeon
Power (TDP) of up to 150W with Intel
configuration limits.
Note: Previous generation Intel
boards described in this document.
®
Visit the Intel
website for a complete updated list of supported processors.
3.1.1
Processor Socket Assembly
Each processor socket of the server board is pre-assembled with an Independent Latching
Mechanism (ILM) and Back Plate which allow for secure placement of the processor and
processor heat to the server board.
The illustration below identifies each sub-assembly component.
3.1.2
Processor Population Rules
Note: Although the server board does support dual-processor configurations consisting of
different processors that meet the defined criteria below, Intel
16
processor E5-2600 or E5-2600 v2 product family, with a Thermal Design
processor E5-2600 or E5-2600 v2 product family, with a Thermal Design
®
®
Xeon
processors are not supported on the Intel
Figure 11. Processor Socket Assembly
Intel order number G42278-004
Intel® Server Board S2600CO Family TPS
®
Server Board S2600COE with possible
®
does not perform validation
®
server
Revision 1.4