Oki T400 User Manual page 31

Configuration
DIP-SW 5 Head Check
Select whether to report an error when there is a problem in the
head (printing area).
Setting Item
Head Check Valid
Head Check Invalid
DIP-SW 6 VR1 setting
VR 1 can be used as the print darkness and offset adjustment.
Setting Item
For offset adjustment
For print darkness
adjustment
24
Description
An error message is
shown if one or more
dots on the print head
are damaged
(The printer stopped
printing).
Head check did not take
place.
Description
VR1 will set label stop
position.
VR1 will set darkness
fine adjustment.
Operation Manual
DIP-SW Setting
DIP-SW Setting
CT400/410