Operation Manual
1.2.4 Front Cover Open
Cutter (optional)
Dispenser (optional)
1. Print Darkness and Offset Adjustment Volume
Depending on the DSW 6 setting you can either set the Print
Darkness or the Label Offset (Label Stop Position).
2. Label Sensor Adjustment
Do not use this. Only for use by service personnel.
3. DIP-SW
Appropriate settings are set according to your printer system
environment. You can change the settings.
Refer to "Configuration".
4. Error Number Display
When the error light is ON, check the displayed number. This
number represents the cause of error.
Refer to "Troubleshooting" for more details.
5. Pitch Adjustement
CT400/410
Standard
Overview
7