Oki T400 User Manual page 25

Configuration
• By clicking the Settings button the Detailed Settings window
will appear, where you can check and modify the printer set-
tings:
• If you execute any printer setting when the computer is not
connected with a printer, all values of the Printer Setting
screen will be default values. To view the current values, click
the Get Data button on the Detailed Settings window, after
connecting your computer to a printer.
Settings
1. Print Method: Displays if the printer is either in thermal-direct
or thermal-transfer mode
2. Head Density: Displays the print head density
3. Print Speed: Sets the print speed. There are 5 speeds for the
T400 and 3 speeds for the T410
4. Print Mode: Displays the current print mode. This selection is
controlled by DIP-SW.
5. Cutter Mode: This is only valid for a printer with a cutter. The
label stop position can be selected:
a. Action 1: Stop at head position
b. Action 2: Stop at cut position
c. Action 3: No backfeed
18
Operation Manual
CT400/410