Dip-Sw Settings - Oki T400 User Manual

Operation Manual

3.2 DIP-SW Settings

Appropriate settings are made according to your printer environ-
ment. However, if there is a setting error, you must change the set-
ting by using DIP-SW. Please read the following instructions
carefully before you change the settings.
1. Make sure the power of the printer is OFF.
2. Open the front cover of the printer.
Caution: There is a transparent cover over the DIP-SW.
Remove this cover when you operate the DIP-SW.
After operations are completed, please put this
cover back on.
3. Switch ON or OFF for each DIP-SW according to the setting.
DIP-SW 1,2
DIP-SW 3
DIP-SW 4
DIP-SW 5
DIP-SW 6
DIP-SW 7
The position of the DIP-SW is set according to the system config-
uration required.
CT400/410
Paper feeding/Download mode
Download mode
Print method
Head check
VR1 setting
Data dump function
Configuration
21