Overview
1.
Paper Holder
When you use a roll of paper, insert the paper here. You can
adjust the width according to the paper size.
2.
Paper Holder Slide Lever
Press this lever to adjust the paper holder width.
3.
Head
Open this part to refill paper and the carbon ribbon (thermal
transfer).
4.
Head Open/Close Lever
Press this to open the head.
5.
Front Cover
Pull to open (Page 7).
6.
Platen Roller
This is the part that feeds paper serving as platen roller for the
print head. Please keep this part clean.
7.
Ribbon Unit
Set the ribbon here.
8.
Sensor
Paper moves through this sensor.
9.
Tool for Darkness Adjustment
This tool can be used for adjusting the potentiometers and the
DIP-SW settings.
10. Upper Cutter Edge of the Cutter Unit (Cutter Version Only)
The upper part of the cutter unit is installed here. Please keep
it clean.
11. Backing Paper Outlet (Dispenser version only)
Backing paper is dispensed through this opening.
6
Operation Manual
CT400/410