2Xx Paper Jams - Lexmark C752 Service Manual

2xx Paper Jams

User primary
message
200 Paper Jam
Clear Paper Path
201 Paper Jam
Clear Paper Path
202 Paper Jam
Clear Paper Path
User secondary
Explanation
message
Leave sheets in Primary: This message indicates that a paper jam has
Finisher area 5 occurred at or near the printer Input Sensor. Open the
printers left door (Paper Jam Removal Door) to access the
jammed media.
Secondary: If sheets have been accumulated to be stapled
when the jam is detected, the printer alternately flashes the
primary and secondary messages indicating the
accumulated sheets should not be removed during jam
clearing.
Note: When the secondary message is displayed, if the
accumulated sheets are removed the printer will not reprint
these sheets. Also if the print job is completed, the portion of
the job printed after the jam will not be stapled.
If removing the jammed media does not fix the problem, go
to
on page 2-68
Leave sheets in Primary: Media has jammed at or before the fuser sensor.
Finisher area 5 Open the printer lower right or center door to access the
jammed media.
Secondary: If sheets have been accumulated to be stapled
when the jam is detected, the printer alternately flashes the
primary and secondary messages indicating the
accumulated sheets should not be removed during jam
clearing.
Note: When the secondary message is displayed, if the
accumulated sheets are removed the printer will not reprint
these sheets. Also if the print job is completed, the portion of
the job printed after the jam will not be stapled.
If removing the jammed media does not fix the problem, go
to
Leave sheets in Primary: Media has jammed at the fuser. Open the printer
Finisher area 5 right door to access the jam area.
Secondary: If sheets have been accumulated to be stapled
when the jam is detected, the printer alternately flashes the
primary and secondary messages indicating the
accumulated sheets should not be removed during jam
clearing.
Note: When the secondary message is displayed, if the
accumulated sheets are removed the printer will not reprint
these sheets. Also if the print job is completed, the portion of
the job printed after the jam will not be stapled.
If removing the jammed media does not fix the problem, go
to"202 Paper Jam" on page
"200 Paper Jam—Options and multipurpose feeder"
or "200 Paper Jam—Tray 1" on page
"201 Paper Jam" on page
5060-2XX
2-65.
2-69.
2-70.
2-15
Diagnostic information