156 Error Code - Lexmark C752 Service Manual

156 error code

Black cartridge drive assembly
Note: Any time any of the cartridge drive motor assemblies are replaced perform the
page 3-17. If this procedure is not performed, error code 168 is displayed.
Step Actions and questions
1 Error code 156 - The black cartridge drive motor has
either failed to lock or has lost lock. Check the black
cartridge drive motor cable connection to J30 on the
system board.
Is the cable installed correctly?
2 Check the black cartridge drive motor cable connection
to the black cartridge drive motor card.
Is the cable installed correctly?
3 Check continuity of the black cartridge drive motor
cable. Is there continuity?
4 Replace the black cartridge drive assembly. Perform
"Motor Detect" on page
Does this fix the problem?
Replace the system board.
5
Does this fix the problem?
157 error code
Magenta cartridge drive assembly
Note: Any time any of the cartridge drive motor assemblies are replaced perform the
page 3-17. If this procedure is not performed, error code 168 is displayed.
Step Actions and questions
1 The magenta cartridge drive motor has either failed to
lock or has lost lock. Check the magenta cartridge
drive motor cable connection to J34 on the system
board.
Is the cable installed correctly?
2 Check the magenta cartridge drive motor cable
connection to the magenta cartridge drive motor card.
Is the cable installed correctly?
3 Check continuity of the magenta cartridge drive motor
cable.
Is there continuity?
3-17.
"Motor Detect" on
Yes No
Go to step 2 Install the cable
correctly
Go to step 3 Install the cable
correctly
Go to step 4 Replace the
black cartridge
assembly cable
Problem solved Go to step 5
Problem solved Call your next
level support
"Motor Detect" on
Yes No
Go to step 2 Install the cable
correctly
Go to step 3 Install the cable
correctly
Go to step 4 Replace the
magenta
cartridge
assembly cable
Diagnostic information
5060-2XX
2-61