Printhead removal and adjustments
Identifying the printheads
A color version of this sheet is available in the appendix.
Warning: Do not loosen or remove all printheads at the same time. If all printheads are loosened or removed,
your reference to readjust will be lost.
Notes:
•
Whenever a printhead is removed, it is necessary to perform the
page 4-56
•
The front cover must be installed and closed before any printhead alignment can be performed. It is not
necessary to remove the cover to access the printheads.
•
If there is a protective lens cover on the new printhead, it must be removed before installing the
replacement printhead.
and
"Printhead electronic alignment" on page
See"Identifying the printheads" on page
"Printhead mechanical alignment" on
4-59.
5060-2XX
A-4.
4-55
Repair information