150 Error Code - Lexmark C752 Service Manual

150 error code

Black cartridge drive assembly
Note: Any time any of the cartridge drive motor assemblies are replaced perform the
page 3-17. If this procedure is not performed, error code 168 is displayed.
Step Actions and questions
1 Indicates the black cartridge drive motor has either
failed to lock or has lost lock. Check the black cartridge
drive motor cable connection to J30 on the system
board.
Is the cable installed correctly?
2 Check the black cartridge drive motor cable connection
to the black cartridge drive motor card.
Is the cable installed correctly?
3 Check continuity of the black cartridge drive motor
cable. Is there continuity?
4 Replace the black cartridge drive assembly. Perform
"Motor Detect" on page
Does this fix the problem?
Replace the system board.
5
Does this fix the problem?
151 error code
Magenta cartridge drive assembly
Note: Any time any of the cartridge drive motor assemblies are replaced perform the
page 3-17. If this procedure is not performed, error code 168 is displayed.
Step Actions and questions
1 Indicates that the magenta cartridge drive motor has
either failed to lock or has lost lock. Check the magenta
cartridge drive motor cable connection to J34 on the
system board.
Is the cable installed correctly?
2 Check the magenta cartridge drive motor cable
connection to the magenta cartridge drive motor card.
Is the cable installed correctly?
3 Check continuity of the magenta cartridge drive motor
cable.
Is there continuity?
4 Replace the magenta cartridge drive assembly.
Perform
Does this fix the problem?
3-17.
"Motor Detect" on page 3-17.
"Motor Detect" on
Yes No
Go to step 2 Install the cable
correctly
Go to step 3 Install the cable
correctly
Go to step 4 Replace the
black cartridge
assembly cable
Problem solved Go to step 5
Problem solved Call your next
level support
"Motor Detect" on
Yes No
Go to step 2 Install the cable
correctly
Go to step 3 Install the cable
correctly
Go to step 4 Replace the
magenta
cartridge
assembly cable
Problem solved Go to step 5
Diagnostic information
5060-2XX
2-57