Specifications - Kyocera KM-4850w Operation Manual

CHAPTER 9 MAINTENANCE AND MANAGEMENT

2. Specifications

Type ...................................................... Console
Original feed system ............................. Fixed platen
Copying system .................................... Indirect electrostatic
Acceptable originals .............................. Sheet
Acceptable original sizes ...................... Maximum: 36" x 48" 36" (W) x 237" (L)
Acceptable Copy Sizes ......................... Maximum: 36" x 48" 36" (W) x 237" (L)
Copy speed ........................................... 4.8 m/minute (6.7 sheets/minute for 36" x 24" portrait [7 sheets/minute for A1 portrait])
Warm up time ........................................ Within 360 seconds (Room temperature 68˚F/20˚C, Humidity 65%RH)
First copy time ....................................... Within 18 seconds (36" x 24" portrait [A1 portrait])
Magnification ratio ................................. Any ratio from 25 to 400% (in 1% or 0.1% increments), plus preset ratios
Memory for storage of image ................ 128 MB as standard (1152 MB at the maximum)
Expansion memory ............................... Standard 168-pin type DIMM (64 MB, 128 MB, 256 MB, 512 MB)
Paper feed system ................................ Two roll units and bypass
Acceptable copy paper ......................... Standard paper (64 to 80 g/m
Multiple copies ...................................... Up to 99
Reading system .................................... Scanning exposure of moving original by means of contact image sensors (600 x 600 dpi)
Writing system ....................................... LED (600 dpi x 600 dpi)
Developing system ................................ Dry
Toner supply system ............................. Bottle cartridge system
Fixing system ........................................ Heat roller
Cleaning system ................................... Blade and fur brush
Photoconductor ..................................... OPC (with dew prevention heater)
Features ................................................ AMS, zoom copy, preset R/E, XY zoom, sort, group, image shift, margin copy, border erase, mirror copy,
Power source ........................................ 120V AC, 60 Hz, 14 A
Power consumption .............................. 1560 W (120 V)
Dimensions ........................................... 52
Installation dimensions .......................... 52
Weight ................................................... Approx. 554.4 lbs./252 kg
Noise emission ...................................... < 70 dB (A)
Accessories ........................................... Copy bin stopper plates, original loop guide, flanges
Options .................................................. Roll unit, carrier sheet, original tray, printer/scanner controller, key counter, and expansion memory
(Specifications are subject to change without notice.)
9-2
A0 920 mm (W) x 6000 mm (L)
Minimum: 8 1/2" x 11" 8 1/2" (W) x 11" (L)
A4 (portrait) 210 mm (W) x 297 mm (L)
Thickness: 64 to 80 g/m 2
A0 920 mm (W) x 6000 mm (L)
Minimum: 8 1/2" x 11" 8 1/2" (W) x 11" (L)
A4 (portrait) 210 mm (W) x 297 mm (L)
2
Thickness: 64 to 80 g/m
Void Area: Leading/trailing edge of paper: 10 mm or less, right/left edge of paper: 3 mm or less
2
Light source: Xenon lamp
image rotation, preview copy, repeat copy, interrupt, job reserve, program, energy saver, auto shut-off, self-
diagnosis
230V AC, 50 Hz, 7 A
1620 W (230 V)
" (W) x 27 " (D) x 47
3/8 11/16
[1330 mm (W) x 704 mm (D) x 1205 mm (H)]
" (W) x 30 " (D)
3/8 1/2
[1330 mm (W) x 774 mm (D) ]
), vellum, film
" (H)
7/16