Kyocera KM-4850w Operation Manual page 73

8 Auto Shut-off Time [Auto shutoff time] 8 8
8 8
1
Press the or key to select the desired auto shut-off
mode.
* If a printer/scanner controller (option) is installed, "Sleep
mode" will be displayed.
(Inch)
(Metric)
2
Press the OK key. The machine will return to the machine
default setting screen.
9 Timer Set 9 9 9 9
NOTE
• If "7 Auto Clear Timer [Auto clear time] is set to "OFF", the auto
clear time cannot be set.
• If "8 Auto Shut-off Time [Auto shutoff time]" is set to "OFF", the auto
shut-off time cannot be set.
• When setting the auto preheat time, do not set a longer time than the
auto shut-off time.
1
Press the or key to select the function for which the
timer is to be set.
(Inch)
(Metric)
CHAPTER 7 MANAGEMENT AND SETTING
2
Press the OK key.
3
Press the or key to set the time that elapses before the
selected function is activated.
> If "Auto Clear Time" has been selected, set the time to from
10 to 300 seconds.
(Inch)
(Metric)
> If "Auto Preheat Time" has been selected, set the time to
from 5 minutes to 45 minutes (in 5-minute increments), 60
minutes, 90 minutes, 120 minutes, 180 minutes or 240
minutes.
(Inch)
(Metric)
> If "Auto Shutoff Time" has been selected, set the time to 5
minutes to 45 minutes (in 5-minute increments), 60
minutes, 90 minutes, 120 minutes, 180 minutes or 240
minutes.
(Inch)
(Metric)
7-13