Page 1: Operation Guide
Things You Can Do! Printer Using your Copier as a (Windows 95/98/Me/NT 4.0/2000) Page 1-1 Using your Copier as a (Macintosh) AutoCAD Printing from (Other Printing Methods) Page 5-1 Operation Guide Using your Copier as a (Windows 95/98/Me/NT 4.0/2000) Printer Page 3-1 <Functions Edition>...
Page 2 Trademark Information • Microsoft, Windows, Windows NT and Internet Explorer are registered trademarks of Microsoft Corporation of America and other countries. • WINDOWS ME is a trademark of Microsoft Corporation of America. • Adobe, Adobe PhotoShop, Acrobat and PostScript are registered trademarks of Adobe Systems Incorporated.
Page 3 Things You Can Do! You can use your machine as a highly functional printer for high quality (600 dpi) printing onto large size Printing paper. Printing from Windows Printing from a Mac Printing from AutoCAD <More printing that you can do>...
Page 4 Scanning You can use your machine as a network scanner for scanning large size documents. Scanning from the copier- scanner's operation panel Scanning from a TWAIN- compatible application <More scanning that you can do> Scanning from an Internet Web browser Settings You can use an Internet Web browser to make printing- and scanning-related settings in your machine.
Page 5: Table Of Contents
2-3 Configuration of the Digital Library CD-ROM ... 1-4 3-1 Installing the Printer Driver (Windows 95/98/Me) ... 1-6 3-2 Installing the Printer Driver (Windows NT 4.0) ... 1-10 3-3 Installing the Printer Driver (Windows 2000) ... 1-18 3-4 Removing the Printer Driver (Windows 95/98/Me/NT 4.0/2000) ... 1-28 5-1 Operation under Windows 95/98/Me ...
Page 6: Section 1 System Configuration
Section 1 System Configuration Page 1-2 The following shows the system configuration when using the copier as a printer for a computer running under a Windows environment. Print command Network hub Printer driver Printout 100BASE-TX (or 10BASE-T) cable Computer Copier-Printer (Windows) Be sure to enter a user name other than "Administrator"...
Page 7: Section 2 About The Accessory Cd-Rom
Section 2 About the Accessory CD-ROM Page 1-3 Using the CD-ROM Once you insert the CD-ROM that is included with the CAD Master Controller into the CD-ROM drive of your computer, the Main Menu screen should appear automatically. (Depending, however, on the related settings in your computer, you may have to access the Main Menu screen manually.
Page 8: Main Menu Screen For The Digital Library Cd-Rom
CD-ROM into the CD-ROM drive. Configuration of the Digital Library CD-ROM Various printer drivers and utilities are included on the Digital Library CD-ROM. Refer to the following flow chart in order to find where each file is located on the CD-ROM.
Page 9 Digital Library CD-ROM Install Drivers (Installs the printer driver for Windows 2000.) Driver Tools Networking Main Menu screen Wide Format Documentation Exit (Quits the Digital Library.) Remove Drivers (Removes the printer drivers.) KM-Net Viewer (Installs the KM-Net Viewer.) Install Driver (Explains the procedure for installing printer drivers.)
Page 10: Section 3 Installing/Removing Printer Drivers
CD-ROM drive Printer Port * Due to operating system restrictions when printing out using a Windows 95/98/Me printer driver, the maximum length that the printout can be is 1300 mm regardless of whether or not you have increased the copier's memory capacity.
Page 11 Use the mouse to point to [Settings] in the [Start] menu on the Task Bar, and click on [Printers] in the submenu that is displayed. The [Printers] folder will open. Double-click on the [Add printer] icon. The Add Printer Wizard will open. Click on [Next]. Select [Network printer] and then click on [Next]. Page 1-7...
Page 12 Click on [Browse] and select the copier-printer within the network tree. * If you are using the KM-4850w copier, it will be listed under [wideformat] > [km4850w <or the registered name of your copier-printer> ] > [km4850w]. Click on [OK] and then on [Next] in the following window.
Page 13 Click on [Browse] and then select the printer driver that you want to install from the CD-ROM. * The printer drivers for Windows 95/98/Me can be found under: E:\Drivers\English\Wide\9X\M3BT0W9X.inf ("E" = Your CD-ROM drive) Click on [OK] and then continue the installation procedure by following each of the steps described on-screen.
Page 14: Installing The Printer Driver (Windows Nt 4.0)
Installing the Printer Driver (Windows NT 4.0) Operating Environment Required environment Free hard disk space Recommended environment Free hard disk space CD-ROM drive Printer Port IBM PC-AT or compatible Windows NT 4.0 (with Service Pack 5 or later installed) 66 MHz i486DX2...
Page 15 Installation Procedures NOTE Be sure to perform BOTH installation procedures "(1) Installing TCP/IP Port" and "(2) Installing the Printer Driver". (1) Installing TCP/IP Port Run Windows NT 4.0. Quit all other applications that may be open. Insert the CD-ROM that is included with the CAD Master Controller into the CD-ROM drive of your computer.
Page 16 Click on [KM-4850w] and then on [TCP/IP Port] in the following window. The Installation wizard will open. Click on [Yes]. Page 1-12...
Page 17 Click on [Start] and then continue the installation procedure by following each of the steps described on-screen. Once installation of TCP/IP Port is complete, perform the following procedure to install the printer driver. Page 1-13...
Page 18 Use the mouse to point to [Settings] in the [Start] menu on the Task Bar, and click on [Printers] in the submenu that is displayed. The [Printers] folder will open. Double-click on the [Add printer] icon. The Add Printer Wizard will open. Click on [Next]. Select [My Computer] and then click on [Next]. Page 1-14...
Page 19 Click on the [Add Port…] button. Select [KM-Wide TCP/IP Port] in the [Available Printer Ports] list and then click on the [New Port…] button. Page 1-15...
Page 20 Type in the IP address or the Host Name of the Server, and click on [OK]. * Be sure the enter the IP address of the copier that has the CAD Master Controller installed. Confirm the correct address by referring to the IP address under the default settings in the copier's operation panel, or by checking with your network manager.
Page 21 It is necessary to select the printer driver that you want to install. Thus, if the accessory CD-ROM is not in the CD-ROM drive, insert it now and click on [Have Disk…]. Click on [Browse] and then select the printer driver that you want to install from the CD-ROM.
Page 22: Installing The Printer Driver (Windows 2000)
Installing the Printer Driver (Windows 2000) Operating Environment Required environment Free hard disk space Recommended environment Free hard disk space CD-ROM drive Printer Port IBM PC-AT or compatible Windows 2000 166 MHz Pentium 24 MB 10 MB 300 MHz Pentium II...
Page 23 Installation Procedure NOTE Installation involves three separate procedures: "(1) Installing the Printer Driver", "(2) Installing TCP/IP Port" and "(3) Creating a New Port". (1) Installing the Printer Driver Run Windows 2000. Quit all other applications that may be open. Insert the CD-ROM that is included with the CAD Master Controller into the CD-ROM drive of your computer.
Page 24 The Setup wizard will open. Click on [Next]. Select [KM-4850w] and click on [Next]. Select [Local] and click on [Next]. Page 1-20...
Page 25 Select the desired port. Since you will have to create a new port under "(3) Creating a New Port" later on, select a temporary port here. The following procedure is explained as though "LPT1" has been selected. Click on [Next] and then continue the installation procedure by following each of the steps described on-screen.
Page 26 (2) Installing TCP/IP Port Run Windows 2000. Quit all other applications that may be open. Insert the CD-ROM that is included with the CAD Master Controller into the CD-ROM drive of your computer. Click on [Wide Format] under [Main Menu] on the left side of the screen. If this screen doesn't appear after you insert the CD-ROM, open the CD-ROM window to access its contents and double-click on the [setup.exe] file.
Page 27 Click on [KM-4850w] and then on [TCP/IP Port] in the following window. The Setup wizard will open. Click on [Yes]. Page 1-23...
Page 28 Click on [Start] and then continue the installation procedure by following each of the steps described on-screen. Once installation of TCP/IP Port is complete, continue to the next step and perform the following procedure in order to change the port for the printer driver that you just installed. Page 1-24...
Page 29 Use the mouse to point to [Settings] in the [Start] menu on the Task Bar, and click on [Printers] in the submenu that is displayed. The [Printers] folder will open. Use the right mouse button to click on the icon for this copier-printer. Select [Properties] from the resulting pop-up menu. The [Properties] dialog box will open.
Page 30 Select [KM-Wide TCP/IP Port] in the [Available port types] list and then click on the [New Port…] button. Type in the IP address or the Host Name of the Server, and click on [OK]. * Be sure the enter the IP address of the copier that has the CAD Master Controller installed. Confirm the correct address by referring to the IP address under the default settings in the copier's operation panel, or by checking with your network manager.
Page 31 Page 1-27 Make sure that the newly created port is selected and click on the [Apply] button. Then click on the [Close] button in the subsequently displayed window. The printer driver installation procedure is now complete.
Page 32: Removing The Printer Driver (Windows 95/98/Me/Nt 4.0/2000)
Removing the Printer Driver (Windows 95/98/Me/NT 4.0/2000) The following procedure explains how to uninstall the printer drivers. The uninstall program can be found on the CD-ROM that is included with this product. Start Windows. Insert the printer driver installer CD-ROM into the CD-ROM drive on your computer.
Page 33 A message to verify whether or not you really want to delete that driver will appear. If you DO want to delete the selected printer driver, click on [Yes]. The selected printer driver will be deleted. NOTE If you are running Windows 95/98 or NT 4.0, your computer will be rebooted after the printer driver is removed. Page 1-29...
Page 34: Section 4 Basic Printing Procedure
Section 4 Basic Printing Procedure The following basic printing procedure is explained as though you are using the WordPad application under a Windows 95 environment. Since the actual printing procedure will differ depending upon your operating system and the application you use, refer to the Instruction Manual for the system and application in use, or to the corresponding Help.
Page 35 Page 1-31 Make sure that the name of the copier-printer that is displayed in the [Name] field is correct, and click on [Properties]. The [Properties] dialog box will open.
Page 36 Perform the desired settings under the [Properties] dialog box. Click on [OK]. The [Print] dialog box will open. Set the number of prints and which pages to print, etc., in the [Print] dialog box and then click on [OK]. Printing will begin. Page 1-32...
Page 37: Section 5 Making Printing Settings (Setting The Properties)
Section 5 Making Printing Settings Operation under Windows 95/98/Me The following explains operation procedures as though you are using a Windows 95 environment. If you are using Windows 98 or Windows Me, use this procedure simply as reference. Opening the [Properties] dialog box There are two methods of opening the [Properties] dialog box: from the [Printers] folder or from within the application in use.
Page 38 Page 1-34 Use the right mouse button to click on the icon for this copier-printer and click on [Properties] in the menu that is displayed. The [Properties] dialog box will open.
Page 39 The settings that can be made in the [Properties] dialog box are separated by content and located under different tabs. The following explanations are for settings under the [Paper] Tab, the [Graphics] Tab and the [Device Options] Tab which relate to printer-specific settings. [Paper] Tab [Paper size] field: Displays the available paper sizes.
Page 40 [Orientation] radio buttons: Displays the available printing orientation. Select either "Portrait" or "Landscape". [Paper source] field: Displays the presently selected location from which paper will be fed. Selection is possible between "Auto Select Tray", "Auto Source Selection", "Cassette 1", "Cassette 2", "Cassette 3"...
Page 41 [Graphics] Tab [Resolution] field: This setting can not be changed from "600 dpi". [Halftoning] settings: If you want to make special settings, select the [Use settings below] radio button and enter the desired values under the [Screen frequency] and [Screen angle] fields. [Print as a negative image] checkbox: Put a check mark in this checkbox when you want to make a negative print (such as with negative film where blacks and whites are inverted.) NOTE...
Page 42 [Device Options] Tab [Auto Rotate] setting: Turn this setting "ON" when you want to have the printed image automatically rotated, as necessary, to fit onto the orientation of the presently set paper. NOTES • If you want to use the [Linear Measure Adjustment] settings, turn [Auto Rotate] "OFF". [Linear Measure Adjustment] can be set using the Web Manager interface.
Page 43 [Option Cassette 1] setting: Select the [Option Cassette 1] setting and use the drop-down menu below it to change the setting to "Installed" when Drawer 1 (the optional roll unit) is installed in the copier-printer. Page 1-39...
Page 44: Operation Under Windows Nt 4.0/2000
Use the mouse to point to [Settings] in the [Start] menu on the Task Bar, and click on [Printers] in the submenu that is displayed. The [Printers] folder will open. Use the right mouse button to click on the icon for this copier-printer and click on [Printing Preferences] (Document Defaults) dialog box will open.
Page 45 Settings in [Printing Preferences] (Document Defaults) dialog box The following explanations are for settings relate to printer-specific settings. For information on other settings, click to the ? button (Help). Paper/Quality ("Page Setup" in Windows NT 4.0) [Page Source] field: Displays the presently selected location from which paper will be fed. Selection is possible between "Automatically Select", "Auto Source Selection", "Cassette 1", "Cassette 2",...
Page 46 NOTES • If you select "Auto Select Tray", paper will be fed from the location designated in the [Cassette] field of the [Option] screen under the [Device] Icon in Web Manager. • If you select "Auto Source Selection", paper will be fed from a location that contains paper of a size appropriate to the documents being printed.
Page 47 [Advanced Options] dialog box [Paper size] field: Displays the available paper sizes. Select from between 11" x 17", 12" x 18", 17" x 22", 18" x 24", 22" x 34", 24" x 36", 34" x 44", 36" x 48", 8.5" x 11", 9" x 12", A0, A1, A2, A3, A4, B1, B2, B3, B4 and PostScript Custom Page Size.
Page 48 [Media] setting: Selection of the desired paper type is possible from among "Plain", "Vellum", "Film", "Custom" and "Printer Default". NOTES • Be sure to turn the [Paper working] setting "ON" in your copier. For more information, refer to the Operation Guide for the copier.
Page 49 Use the mouse to point to [Settings] in the [Start] menu on the Task Bar, and click on [Printers] in the submenu that is displayed. The [Printers] folder will open. Use the right mouse button to click on the icon for this copier-printer and click on [Properties] in the menu that is displayed. The [Properties] dialog box will open.
Page 50 Part 2 Using your Copier as a Scanner (Windows 95/98/Me/NT 4.0/2000) Section 1 System Configuration ... 2-3 Section 2 About the Accessory CD-ROM ... 2-6 Section 3 Installing the Software ... 2-9 Section 4 Using the TWAIN Source ... 2-18 1-1 When Using the TWAIN Source ...
Page 51 Section 5 Using the Scanner File Utility ... 2-25 5-1 What is the Scanner File Utility? ... 2-25 5-1-1 Preparations ... 2-25 5-1-2 Operation Flow ... 2-26 5-2 Main Dialog Box ... 2-27 5-2-1 Opening the Main Dialog Box ... 2-27 5-2-2 About the Main Dialog Box ...
Page 52: Section 1 System Configuration
Section 1 System Configuration Page 2-3 When Using the TWAIN Source Scan command Scanned data Network hub Scanning TWAIN Source 100BASE-TX (or 10BASE-T) cable Computer Copier-Scanner (Windows)
Page 53: When Using The Scanner File Utility (Pcscan)
Page 2-4 When Using the Scanner File Utility (PCScan) The following is the system configuration when sending scan data to a computer running under a Windows environment. Scanned data Scan command Network hub Scanning Scanner File Utility 100BASE-TX (or 10BASE-T) cable Computer Copier-Scanner (Windows)
Page 54: When Scanning Using An Internet Web Browser (Webscan)
Page 2-5 When Scanning Using an Internet Web Browser (WebScan) The following is the system configuration when using the Web Manager Interface to scan from an Internet Web browser. Scan command Scanned data Network hub Internet Web Scanning Browser Web Manager Interface 100BASE-TX (or 10BASE-T) cable...
Page 55: Section 2 About The Accessory Cd-Rom
Section 2 About the Accessory CD-ROM Page 2-6 Using the CD-ROM Once you insert the CD-ROM that is included with the CAD Master Controller into the CD-ROM drive of your computer, the Main Menu screen should appear automatically. (Depending, however, on the related settings in your computer, you may have to access the Main Menu screen manually.
Page 56: Main Menu Screen For The Digital Library Cd-Rom
CD-ROM into the CD-ROM drive. Configuration of the Digital Library CD-ROM Various printer drivers and utilities are included on the Digital Library CD-ROM. Refer to the following flow chart in order to find where each file is located on the CD-ROM.
Page 57 Digital Library CD-ROM Install Drivers (Installs the printer driver for Windows 2000.) Driver Tools Networking Main Menu screen Wide Format Documentation Exit (Quits the Digital Library.) Remove Drivers (Removes the printer drivers.) KM-Net Viewer (Installs the KM-Net Viewer.) Install Driver (Explains the procedure for installing printer drivers.)
Page 58: Section 3 Installing The Software
IBM PC-AT or compatible Windows 95 (OSR2)/98 (Second Edition)/Me/ NT 4.0 (with Service Pack 5 or later installed)/2000 266 MHz Celeron or faster 128 MB or more 300 MB One drive One 100BASE-TX or 10BASE-T port (shared with printer) Page 2-9...
Page 59 Installation Procedure NOTE In order to use TWAIN Source under Windows 95, Winsock2 must be installed in your computer. Winsock2 can be downloaded from Microsoft's public domain homepage: www.microsoft.com Run Windows. Quit all other applications that may be open. Insert the CD-ROM that is included with the CAD Master Controller into the CD-ROM drive of your computer.
Page 60 Page 2-11 Click on [KM-4850w] and then on [TWAIN Source] in the following window. The Installation wizard will open. Click on [Next].
Page 61 Select the language you want to use for the TWAIN Source and click on [OK]. Type in the IP address or the Host Name of the Server, and click on [Next]. Continue the installation procedure by following each of the steps described on-screen. Page 2-12...
Page 62: Removing The Twain Source
Removing the TWAIN Source Removal of the TWAIN Source is accomplished by using the [Add/Remove Programs] Control Panel. Run Windows. Use the mouse to point to [Settings] in the [Start] menu on the Task Bar, and click on [Control Panel] in the submenu that is displayed.
Page 63: Installing The Scanner File Utility
One drive Network Port One 100BASE-TX or 10BASE-T port (shared with printer) * Be aware that when you attempt to scan a large-sized original at a high resolution and high quality grayscale, the size of the image file that is created will be quite large and memory needs will thus be greater than listed above.
Page 64 Installation Procedure Run Windows. Quit all other applications that may be open. Insert the CD-ROM that is included with the CAD Master Controller into the CD-ROM drive of your computer. Click on [Wide Format] under [Main Menu] on the left side of the screen. If this screen doesn't appear after you insert the CD-ROM, open the CD-ROM window to access its contents and double-click on the [setup.exe] file.
Page 65 Click on [KM-4850w] and then on [Scanner File Utility] in the following window. Continue the installation procedure by following each of the steps described on-screen. Page 2-16...
Page 66: Removing The Scanner File Utility
Removing the Scanner File Utility Removal of the Scanner File Utility is accomplished by using the [Add/Remove Programs] Control Panel. Run Windows. Quit the Scanner File Utility. (Refer to page 2-27.) Use the mouse to point to [Settings] in the [Start] menu on the Task Bar, and click on [Control Panel] in the submenu that is displayed.
Page 67: Section 4 Using The Twain Source
Section 4 Using the TWAIN Source Basic Scanning Procedure The following basic scanning procedure explains how to scan with the TWAIN-compatible application Adobe Photoshop using the TWAIN Source. The general operational flow involves sending a scan command from your computer and setting the document to be scanned in the copier-scanner once it is in a "scan ready"...
Page 68 Select the "scanner" (the copier with CAD Master Controller installed) that you want to use and click on [Select]. Use the mouse to point to [Import] under the [File] menu and click on [TWAIN_32…]. Page 2-19...
Page 69 Perform whatever settings are required. Click on [Scan]. * If you are unable to connect to the copier-scanner, make sure that it is operating and that it is not being used for another operation like copying. When the copier-scanner is in a "scan ready" state, "Ready to scan." will appear in the copier- scanner's message display.
Page 70: Making Scanning Settings (Settings In The [Network Scanner] Dialog Box)
Making Scanning Settings (Settings in the [Network Scanner] Dialog Box) The following explains some of the settings that can be made in the [Network Scanner] dialog box. For more detailed information, click on the [Help] button as well. NOTE The available image transmission sizes and other available setting items will depend upon the settings made for the resolution and grayscale quality.
Page 71 [Original Size] field: Select the size of the document to be scanned. Selection is possible between "Automatic", "Standard Size" (Refer to " Size]"), "U1" through "U6" and "Custom". "U1" through "U6" will display custom sizes that you have registered previously. Registration of these custom sizes "U1" through "U6" is accomplished by selecting [Custom] first and then performing the appropriate operation in the [Custom size] dialog box.
Page 72 [Sample Depth] field: Select the level of grayscale. Selection is possible between "B/W", "B/W (halftone)", "Grayscale (STD)" and "Grayscale (HQ)". [Mir.] checkbox: Put a check mark in this checkbox when you want to take a mirror-image scan of your document where the left and right sides are reversed. [Neg.] checkbox: Put a check mark in this checkbox when you want to take a negative scan (such as with negative film where black and white is reversed).
Page 73 Page 2-24 [Scanner Setting] Dialog Box [Scanner Address] field: Type in the IP address or the Host Name of the copier-scanner here. [Unit] radio buttons: Select the desired unit of measure, either "Inch" or "Millimeter".
Page 74: Section 5 Using The Scanner File Utility
Section 5 Using the Scanner File Utility What is the Scanner File Utility? The Scanner File Utility is responsible for sending scanned image data directly to your computer and saving it in a designated folder. Once the Scanner File Utility is installed in your computer, it will start up automatically each time you boot up the computer, an icon will appear on the Task Bar to indicate that it is running and the utility will remain in a waiting state for data to be sent from the copier-scanner.
Page 75: Operation Flow
5-1-2 Operation Flow The following illustrates the flow of operation when using the Scanner File Utility to save scanned data to a destination folder on your computer. Use your Internet Web browser to register the information about the destination computer. Scan the document.
Page 76: Main Dialog Box
Main Dialog Box Once installed in your computer, the Scanner File Utility will start up automatically each time you boot up the computer. However, any time you want to quit the utility program, whenever you want to designate the folder into which data – received from the copier-scanner – will be saved, as well as when you want to set a security password for that folder, you will need to access the Main dialog box.
Page 77: About The Main Dialog Box
5-2-2 About the Main Dialog Box [Status] area: Displays the current status of the copier-scanner. [OK] button: Click on this button when you want to close the main dialog box. [Setup] button: Click on this button when you want to designate a new destination folder for receiving scanned data, or when you want to change settings or set a security password for any of the currently designated folders.
Page 78: Making Settings For Scan Data Destination Folders
Making Settings for Scan Data Destination Folders 5-3-1 About the [Setup] Dialog Box Any time that you want to designate a new destination folder for receiving scanned data, or when you want to change settings or set a security password for any of the currently designated folders, click on the [Setup] button in the Scanner File Utility's main dialog box.
Page 79 [New] button: Click on this button when you want to designate a new destination folder for receiving scanned data. [Edit] button: Click on this button when you want to edit information for any currently designated folder. [Delete] button: Click on this button when you want to remove the designation of any folder as a destination folder for receiving scanned data.
Page 80: Designating A New Destination Folder For Receiving Scanned Data
5-3-2 Designating a New Destination Folder for Receiving Scanned Data When you want to designate a new destination folder, click on the [New] button in the [Setup] dialog box. The [Folder Setting] dialog box will open. Type an unregistered number between "1" and "100" into the [No.] field. * The number that you enter here will become the "folder number"...
Page 81 Click on […] to the right of the [Folder] field in order to select the new folder that you want to use as a destination folder for receiving scanned data. The [Select Folder] dialog box will open. * You may also select the desired folder by typing the path for that folder directly into the [Folder] field.
Page 82 If you want to enter a comment about that folder, type the desired information directly into the [Comment] field (up to 32 characters). You can also designate a password for that folder for security purposes. If you want to set a security password for that folder, type the desired password directly into the [Folder Password] field (up to 8 characters).
Page 83 5-3-3 Changing Settings for a Registered Destination Folder When you want to change the settings of a destination folder currently registered to receive scanned data, select the folder you want from among the displayed list and then click on the [Edit] button in the [Setup] dialog box.
Page 84 If you want to change the security password for that folder, type the currently registered password into the [Old Password] field. Type the new password that you want to register directly into the [New Password] field (up to 8 characters). In order to ensure that the new password was entered correctly, type the same password into the [Confirm New Password] field.
Page 85: Removing A Destination Folder Designation
5-3-4 Removing a Destination Folder Designation Perform the following procedure when you want to remove the designation of any folder as a destination folder for receiving scanned data. In the [Folder] column of the [Setup] dialog box, click on the folder that you want to remove the destination folder designation for, in order to select it.
Page 86: Saving Scanned Data As A File
Saving Scanned Data as a File 5-4-1 Outline of the Procedure The following procedure explains in general how to use the Scanner File Utility to receive graphic image data from the copier-scanner. Make sure that the Scanner File Utility is running in the computer in which you want to receive the data.
Page 87: File Names
5-4-2 File Names Whenever graphic image data is saved as a file on any computer, the file name (up to 16 characters + suffix) will be created based on information registered in advance using an Internet Web browser. If no settings have been made in advance, the file name will be automatically determined based on the following rules.
Page 88: If An Error Occurs When Writing Data To The Destination Hard Disk
Page 2-39 5-4-3 If an Error Occurs when Writing Data to the Destination Hard Disk If there is insufficient space on the hard disk to save any file that is sent from the copier-scanner, reception of any subsequent data for that image will be stopped and the data received up to the point that the hard disk becomes full will be deleted.
Page 89: Scanning Functions Combination Charts
Scanning Functions Combination Charts 5-5-1 During Scan to PC (PCScan) Resolution 2400 dpi * 1200 dpi * Under 600 dpi Format/ TIFF (2) Quality TIFF (2 [Halftone]) JPEG (Grayscale [STD]) * JPEG (Grayscale [HQ]) * Resolution 2400 dpi * 1200 dpi * Under 600 dpi File Type TIFF (Monochrome)
Page 90: During Webscan
5-5-2 During WebScan Settings on the operation panel Original Scan Image Type Density Transmission Setting Adjustment Size 2400 dpi 1200 dpi Under 600 dpi Monochrome Halftone Grayscale (STD) Grayscale (HQ) *1: There may be no change even if the "Original Type" setting is changed. *2: The image transmission size setting will be changed to "Auto Detect".
Page 91: When Using The Twain Source
5-5-3 When using the TWAIN Source Settings on the operation panel Original Type Setting Resolution 2400 dpi 1200 dpi Under 600 dpi Sample Depth (halftone) Grayscale (STD) Grayscale (HQ) *1: There may be no change even if the "Original Type" setting is changed. *2: The image transmission size setting will be changed to "Auto Detect".
Page 92: Image Transmission Size
5-5-4 Image Transmission Size If you select "Grayscale" or "JPEG", the available image transmission sizes will differ depending upon the resolution that you select. In addition, whenever you select a resolution of 2400 dpi or 1200 dpi, the selected image transmission size will become invalid and the setting will automatically change to "Auto Detect".
Page 93: Original Size
5-5-5 Original Size If you select "Grayscale" or "JPEG", the available original sizes will differ depending upon the resolution that you select. In addition, whenever you select a resolution of 2400 dpi or 1200 dpi, the selected original size will become invalid and the setting will automatically change to "Auto Detect".
Page 94 Section 3 Setting up the Printer Driver ... 3-4 Section 4 Basic Printing Procedure ... 3-9 Section 5 Making Printing Settings (Setting the Printer Specific Options) ... 3-12 2-1 Using the Accessory CD-ROM ... 3-3 3-1 Installing the Printer Driver ... 3-4 3-2 Making Settings in the Chooser ...
Page 95: Section 1 System Configuration
Section 1 System Configuration Page 3-2 The following shows the system configuration when using the copier as a printer for a Macintosh computer. Print command Network hub LaserWriter 8 PPD File Printout 100BASE-TX (or 10BASE-T) cable Computer Copier-Printer (Macintosh)
Page 96: Section 2 About The Accessory Cd-Rom
Section 2 About the Accessory CD-ROM Page 3-3 Using the CD-ROM Insert the CD-ROM that is included with the CAD Master Controller into the CD-ROM drive of your computer. Double-click on the icon for the CD-ROM when it appears on the Desktop. The content of the CD-ROM will be displayed.
Page 97: Section 3 Setting Up The Printer Driver
Section 3 Setting up the Printer Driver Installing the Printer Driver In order to use your copier as a printer for a Macintosh computer, the LaserWriter 8 printer driver and the PPD file for this model copier-printer must be install in the computer.
Page 98 Double-click on the icon for the CD-ROM when it appears on the Desktop. The content of the CD- ROM will be displayed. Drag the [km4850w.ppd] from the [KM-4850w] folder on the CD-ROM into the [Printer Descriptions] folder on your computer. The [Printer Descriptions] folder is normally located within the [Extensions] folder that is in the [System Folder] on your hard disk.
Page 99: Making Settings In The Chooser
Select [Chooser] in the Apple Menu. Click on [LaserWriter 8] in the left portion of the [Chooser] and then click on [KM-Wide] in the [Select a PostScript Printer] list on the right side in order to choose it. Click on the [Create] button.
Page 100 Select [km4850w.ppd] in the [Choose a File] dialog box that opens and click on the [Choose] button. The screen will return to the [Chooser]. If the optional Drawer 1 is installed, continue with the following procedure in order to make the appropriate settings for that drawer.
Page 101 Chooser Settings (Making the optional Drawer 1 available) If you want to use the optional Drawer 1, continue with the settings procedure as follows. Select the copier-printer in the right side of the [Chooser] window and then click on the [Setup…] button.
Page 102: Section 4 Basic Printing Procedure
Section 4 Basic Printing Procedure The following basic printing procedure is explained as though you are using the SimpleText application on your Macintosh computer. Since the actual printing procedure will differ depending upon the application you use, refer to the Instruction Manual for the application in use, or to the Help menu. Open the file that you want to print in SimpleText.
Page 103 Select the desired paper size, etc., and click on [OK]. Select [Print…] under the [File] menu. The [Print] window will open. Page 3-10...
Page 104 Set the number of prints and which pages to print, etc., in the [Print] window and then select [Font Settings] or [Printer Specific Options]. (For information on the [Printer Specific Options] setting, refer to page 3-12.) Under [Font Settings], put a check mark in the [Always download needed fonts] and [Never generate Type 42 format] checkboxes.
Page 105: Section 5 Making Printing Settings (Setting The Printer Specific Options)
Making Printing Settings (Setting the Printer Specific Options) The following explains the printer-related settings that can be made under [Printer Specific Options]. For information on other settings, refer to the Instruction Manual for the application in use, or to the Help menu.
Page 106 [Media] setting: Selection of the desired paper type is possible between "Plain", "Vellum", "Film", "Custom" and "Printer Default". NOTES • Be sure to turn the [Paper working] setting "ON" in your copier. For more information, refer to the Operation Guide for the copier.
Page 107 Part 4 Accessory Utilities Section 1 About the Accessory Utilities ... 4-2 Section 2 Using Web Manager ... 4-5 Section 3 Using the Print Utility ... 4-49 1-1 The Web Manager Interface ... 4-2 1-2 The Print Utility ... 4-3 1-3 KM-Net Viewer ...
Page 108: Section 1 About The Accessory Utilities
Section 1 About the Accessory Utilities Page 4-2 The following interface and utilities are included with the CAD Master Controller. The Web Manager Interface With the Web Manager interface, no special software other than a standard Internet Web browser (Internet Explorer, etc.) is required to make settings and send scan commands to the a copier with the CAD Master Controller installed.
Page 109: The Print Utility
Page 4-3 The Print Utility The Print Utility allows you to select a file and print it without the need to open it in the application that created it. Print Utility TIFF Print command...
Page 110: Km-Net Viewer
Convenient when… You want to print a completed data file You want to print multiple files You want to print multiple sets fast Compatible file formats HP-GL, HP-GL2, HP-RTL, Calcomp906/PCI, Calcomp907/PCI, CALS_G4 (TIFF6.0), DXF (AutoCAD standard, some settings restricted), TIFF, JPEG, BMP, DGN (option) and CGM (option) The Print Utility is compatible for use under Windows 95/98/Me, Windows NT 4.0 and Windows 2000.
Page 111: Section 2 Using Web Manager
Section 2 Using Web Manager What is Web Manager? With the Web Manager interface, no special software other than a standard Internet Web browser (Internet Explorer, etc.) is required to use a computer to connect directly to, and make various settings in, a copier with the CAD Master Controller installed.
Page 112 Disabling the Proxy Server setting In Internet Explorer, select [Internet Options…] under the [Tools] menu and then click on the [Connections] Tab. Make sure there is NO check mark in the checkbox for [Use a proxy server] under [LAN Settings…]. When used with a Macintosh computer…...
Page 113: Running Web Manager
Running Web Manager Start up your Internet Explorer application. Type the IP address of the copier into the location field as follows: http:// <the IP address of your copier> / NOTES • Confirm the correct address by referring to the IP address under the default settings in the copier's operation panel, or by checking with your network manager.
Page 114 The User Setting Check screen You can check in your computer whether or not the Web Manager screen is being displayed properly. Once you are finished, click on [Kyocera Mita Wide format Web Manager] to access the Web Manager interface directly.
Page 115 Log in Content Displays the printing conditions and enables changes to settings. Displays the status of the copier-printer and enables settings related to options. Enables settings related to spooling. Enables verification of the System Log, Account Log, AutoPrint Log and Update Log.
Page 116 Icon Menu name Log in Password User Scanner Administrator / User Filter Administrator / User System Administrator Help Administrator / User Content Enables changing of the password for the account under which you have logged in. Enables scanning to be performed using the Web Manager and well as PCScan settings.
Page 117: Spooler Icon
2-3-1 Spooler Icon The [Spooler] screen displays printing conditions and allows you to change and cancel print jobs, etc. Only the Administrator can cancel a print job which originated from another computer. [Spool Disk] bar: Indicates the amount of memory allotted for spooling that is currently being used. [Spooler] area: Indicates the current status of the spooler, the number of jobs being spooled and the automatic refresh rate.
Page 118 Page 4-12 [Device] area: Indicates the current status of the copier-printer. [Job Display] field: Select from between "View All Jobs" and "View My Jobs Only". [Job List]: Lists up all spooled jobs under their current status: "Printed", "Waiting", "Pause" or "Error"...
Page 119 Page 4-13 2-3-2 Device Icon The [Device] screen displays the status of the copier-printer and allows you to make settings related to options. There are two sub-screens under the [Device] menu: the [Status] screen and the [Option] screen. [Status] screen: Allows you to verify the status of the copier-printer in graphical and text messages.
Page 120 * [Cassette 1] (drawer 1) is an optional accessory. [Status] area: Displays the status of the copier-printer in graphical and text messages. For information in regard to the appropriate procedure if an error occurs, refer to the Help Icon.
Page 121 The [Option] screen allows you to make option-related settings. Be sure to click on the [Enter] button if you change any settings. [Max Error Retries] field: Set the number of times the copier-printer will attempt to reprint after an error. Setting is possible between 1 and 9999 times.
Page 122 [Cassette] field: Selection is possible between "Auto Source Selection", "Cassette 1" (option), "Cassette 2", "Cassette 3" and "Bypass Tray". [Linear Measure Adjustment] settings: Adjust the 1:1 magnification ratio for each type of paper. NOTE The [Linear Measure Adjustment] settings will be invalid whenever you print with the [Auto Rotate] function.
Page 123: Config Icon
Page 4-17 2-3-3 Config Icon The [Config] screen allows you to change spooling settings. The [Config] screen contains 4 tabs: [Network], [Server], [Logging] and [Language]. [Network] Tab Sets the refresh rate for spooling information. [Spooler Data Refresh] settings: Select between "Automatic" (0 - 999 seconds) and "Manual" refresh. [Configuration for Administrators] setting: Select a refresh rate between 10 and 999 seconds.
Page 124 [Server] Tab Shows system information for the print server and determines how data for finished jobs will be handled. [Printed Jobs Action] The following 2 settings determine the condition for deleting finished print jobs: [Enable deletion by time] checkbox and field: Put a check mark in this checkbox and set the time for jobs to be deleted between 1 and 99999 hours.
Page 125 [Logging] Tab The System Log, Account Log and AutoPrint Log settings can be changed in their corresponding tabs. NOTE If you increase the collection level in any of the log files, the size of the corresponding file will increase. [System Log] Tab Set the collection level and the number of back-up revisions that will be saved for the System Log.
Page 126 Page 4-20 [Language] Tab [Language for Web Screen] field: Selects the language that will be used in the Web Manager interface.
Page 127: Log Icon
[System Log] Tab The System Log can be displayed or downloaded. The System Log contains important information about the operation of the copier-printer and which is useful in case of machine trouble. Page 4-21...
Page 128 [Account Log] Tab All of the information in the Account Log, or just that for a specific user or group, can be displayed or downloaded. It is also possible to select the time frame for which that data will be displayed. [AutoPrint Log] Tab The AutoPrint Log, which shows the printing results when the [Auto Print] function is used as well as printing errors, can be displayed or downloaded.
Page 129: User Icon
2-3-5 User Icon The [User] screen allows you to manage individual or group use. Group [Group] column: Displays a list of the currently registered groups. [New Group] button: Click on this button when you want to access the [Group Management] dialog box in which you can create new groups.
Page 130 User [User] column: Displays a list of the currently registered users. [New User] button: Click on this button when you want to access the [User Management] dialog box in which you can register new users. [Properties] button: Click on this button when you want to access the [User Management] dialog box that corresponds to the selected user.
Page 131 Creating a New Group Click on the [New Group] button and the [Group Management] dialog box will open. Register the desired information and settings. [Group Name] field: Enter up to 20 characters for the Group Name. [Limit Sheet Max] checkbox and fields: Limits the number of prints that group can make during the designated period.
Page 132 Registering a New User Click on the [New User] button and the [User Management] dialog box will open. Register the desired information and settings. [User Name] field: Enter up to 20 characters for the User Name. [Password] field: Enter up to 14 characters for the password. (This field can be left blank.) [Confirm Password] field: For verification purposes, enter exactly the same password as you did in the [Password] field.
Page 133 [Group] lists: To add this user to a group, select an existing group from the list at right and then click on the [<- Add] button. To delete this user from a group, select the group that they already belong to from the list at left and then click on the [Delete ->] button.
Page 134: Password Icon
2-3-6 Password Icon The [Password] screen allows you to set the password for the user account currently being accessed. Enter the new password in the [Password] field. (Up to 14 characters can be used for the password.) Enter exactly the same password as you did in the [Password] field into the [Confirm Password] field. Click on the [Enter] button.
Page 135: Scanner Icon
Page 4-29 2-3-7 Scanner Icon The [Scanner] screen allows you to perform WebScan and PCScan procedures from your Internet Web browser. There are three sub-screens under the [Scanner] menu: the [Web Scan] screen, the [Scan File] and the [Scan to PC] screen. [Web Scan] screen: Allows you to send scan commands from your Internet Web browser.
Page 136 Page 4-30 • [Web Scan] screen The [Web Scan] screen allows you to send scan commands from your Internet Web browser. (WebScan) Workspace NOTE The available image transmission sizes and other available setting items will depend upon the settings made for the resolution and grayscale quality. For more information, refer to "5-5 Scanning Functions Combination Charts"...
Page 137 [Mirror] radio buttons: Select the "ON" radio button when you want to take a mirror-image scan of your document (left and right sides are reversed). [Negative] radio buttons: Select the "ON" radio button when you want to take a negative scan (blacks and whites are reversed).
Page 138 Page 4-32 [Scan File] screen The [Scan File] screen lists, or shows thumbnails, of images that were scanned using the WebScan function. You can also download the images to your computer from this screen. [Refresh] button: Click on this button when you want to display the most recent information. [Delete] button: Click on this button when you want to delete the selected image.
Page 139 [Scan to PC] screen The [Scan to PC] screen allows you to make settings for the PCScan function using the Scanner File Utility. Setting that can be made include information about the destination folder (for saving scanned data) that was registered both in the destination computer and in the Scanner File Utility. However, registration of the destination folder must be made first in the Scanner File Utility.
Page 140 [Edit] button: Select an unregistered destination number and then click on this button when you want to register a new destination. The [Destination Configuration] dialog box will open. If you select a destination number that already contains destination information, when you click on this button that information will be displayed and can be edited.
Page 141 Registering a Destination Computer Select an unregistered destination number in the [Destination PC Configuration] list and then click on the [Edit] button. The [Destination Configuration] dialog box will open. Register the desired information. [No.] field: The destination number that you selected in the [Destination PC Configuration] list will be displayed here.
Page 142 [Destination PC] field: Enter the IP address or the Host Name of the destination computer. (If you enter BOTH, the IP address will take priority.) * The host name can be up to 16 characters in length. [Save Number] field: Enter the "folder number" of a folder designated in that computer for saving scanned data, as it is registered in the Scanner File Utility.
Page 143 Using the WebScan function Access the [Scanner] screen in the Web Manager interface. Perform the [Recording Format] setting as well as the scan- and image-related settings and then click on the [Scan] button. Confirm that "Ready to scan." is shown in the copier-scanner's message display and set the document that you want to scan.
Page 144 Page 4-38 Select the destination and enter the desired file name, and then click on the [Save] button. NOTES If you are unable to scan, check the status of the copier-scanner. One of the following conditions may be rendering scanning impossible: •...
Page 145: Filter Icon
Page 4-39 2-3-8 Filter Icon The [Filter] screen allows you to make filter-related settings when using the [Auto Print] function. (Settings are only accessible to the Administrator.) Outline of the Filter function The Filter function in the CAD Master Controller is used to take standard image formats used in today's computers, as well as HP-GL/2 formatted plotter command files which are often used in CAD applications, and convert them into file formats that can be printed.
Page 146 NOTE Anytime you change the current default settings, be sure to click on the [Enter] button to register those changes. [Filter Setting List]: Displays the 24 FTP Virtual Directories in order as "Filter 001" through "Filter 024". If you want to change the registered settings for any filter, first select that filter in this list. [Filter Format] field: Sets the file format for that filter.
Page 147 [Comment] field: Enter any comments that you want for the corresponding filter. [List All] button: Click on this button when you want to list all filters. Use this button when you want to use the print function of your Internet Web browser to print out a list of the registered filters. [Original Size] field: Select between "Original Size", "Standard Size"...
Page 148 (white space) as well as those related to inverted printing. [Media] field: Select between "Plain", "Vellum", "Film", "Custom" and "Printer Default". [Edge Adjustment] settings: Determine the amount of margin space that will be added to the leading and trailing edge of the paper.
Page 149 [Negative] checkbox: Put a check mark in this checkbox when you want to make a negative print (such as with negative film where blacks and whites are inverted.) NOTE Normally, the area of a printed page that remains white is greater than that which is actually printed on.
Page 150: System Icon
Page 4-44 2-3-9 System Icon The [System] screen allows you to perform system-related settings. The [System] screen contains 2 tabs: [Test Print] and [Server Setting]. [Test Print] Tab [Device Information] button: Click on this button when you want to print out current settings information.
Page 151 [Server Setting] Tab [Time and Date] button: Click on this button when you want to synchronize the time and date in both the server computer in the CAD Master Controller and your computer. Make sure that the time and date setting in your computer is correct.
Page 152 [Network Setting] button Click on this button when you want to change network settings. Anytime you change the current default settings, be sure to click on the [Enter] button to register those changes. [Identification] settings: Enter the desired name for the copier with CAD Master Controller installed under the [Computer Name] field.
Page 153: Help Icon
[IP Address] settings: Select one of the 2 methods below for designating the IP address for the copier with CAD Master Controller installed. 1 [Obtain IP address from a DHCP server] 2 [Specify an IP address] If you select [Specify an IP address], enter the [IP Address], [Subnet Mask] and [Default Gateway] information appropriate to your network environment.
Page 154 Page 4-48 2-3-10 Help Icon The [Help] screen displays the On-Line Help for the Web manager interface. Refer to this screen when you have questions about operation procedures or settings.
Page 155: Section 3 Using The Print Utility
Section 3 Using the Print Utility Page 4-49 What is the Print Utility? The Print Utility allows you to select a file and print it without the need to open it in the application that created it. Print Utility TIFF Print command...
Page 156 Convenient when… You want to print a completed data file You want to print multiple files You want to print multiple sets fast Compatible file formats HP-GL, HP-GL2, HP-RTL, Calcomp906/PCI, Calcomp907/PCI, CALS_G4 (TIFF6.0), DXF (AutoCAD standard, some settings restricted), TIFF, JPEG, BMP, DGN (option) and CGM (option) / Since you only need to select the file, the time it normally takes to open it in an application is eliminated.
Page 157 200 MHz Pentium or faster 64 MB or more Free hard disk 100 MB space CD-ROM drive One drive Printer Port One 100BASE-TX or 10BASE-T port Windows 98 Windows Me Windows NT 4.0 (with Service Pack 5 or later installed)
Page 158: Installing The Print Utility
Installing the Print Utility Run Windows. Quit all other applications that may be open. Insert the CD-ROM that is included with the CAD Master Controller into the CD-ROM drive of your computer. Click on [Wide Format] under [Main Menu] on the left side of the screen. If this screen doesn't appear after you insert the CD-ROM, open the CD-ROM window to access its contents and double-click on the [setup.exe] file.
Page 159 Click on [KM-4850w] and then on [Print Utility] in the subsequent window. The Setup wizard will open. Continue the installation procedure by following each of the steps described on-screen. Page 4-53...
Page 160: Basic Printing Procedure
[PrintUtility] window will open. NOTE If you do not change the link folder for the program icon, a [Start] > [Program] > [Kyocera Mita] > [KM- Wide PrintUtility] shortcut will be registered during installation. Drag and drop the file that you want to print onto the [PrintUtility] window.
Page 161: Making Print Settings (Print Utility Window)
If you want to change printers, click on the name of the previously selected printer (it should be highlighted) in order to de-select it, and then click on the name of the printer that you do want to use in order to select that printer.
Page 162 [Enable Tandem Print Function] checkbox: Put a check mark in this checkbox when you want to select the Tandem Print Function and simultaneously print out using two copier-printers (the KM-4850w, KM- P4850w or KM-P4849w models) that are connected together. if you select this option, be sure to select 2 copier-printers in the [Output Destination] area.
Page 163 [Cassette] field: Displays the presently selected location from which paper will be fed. Selection is possible between "Auto Source Selection", "Cassette 1" (option), "Cassette 2", "Cassette 3" and "Bypass Tray". * "Cassette 1" will only be available when the [Optional Cassette] checkbox is checked in the [Extended Setup] dialog box.
Page 164 [Media] field: Selection of the desired paper type is possible from among "Plain", "Vellum", "Film", "Custom" and "Printer Default". NOTES • Be sure to turn the [Paper working] setting "ON" in your copier. For more information, refer to the Operation Guide for the copier.
Page 165 [Edge Adjustment] settings: Determine the amount of margin space that will be added to the leading and trailing edge of the paper. NOTE If you enter values here, the length of the printed paper will be increased by the total length of the margin spaces selected.
Page 166 [Installation Option] setting: Be sure to put a check mark in the [Optional Cassette] checkbox when the optional Drawer 1 is installed in the copier-printer. If this box is not marked, you will not be able to select Drawer 1 for printing.
Page 167 [Stamp Setting] Dialog Box This dialog box opens when you put a check mark in the [Use Stamp Setup] checkbox and then click on the [Stamp Setup…] button in the main window of the Print Utility. It allows you to register images or text (such as "CONFIDENTIAL") to be printed onto each sheet of paper.
Page 168 [Text] field: This field is displayed when you select the [Text] radio button under [Stamp Type]. Enter the text that you want to use as a stamp into this field, and then click on the [Font] button to select the styles that you want to use for that text.
Page 169 [StampPlacement] settings: Determine the location of the stamp on the printed paper. Y (+) X (-) CONFIDENTIAL X,Y (0,0) Y (-) Inch specs X: -18" – +18" Y: -118.5" – +118.5" Metric specs X: -460 mm – +460 mm Y: -3000 mm – +3000 mm [Density] field: Selects the contrast at which the stamp will be printed.
Page 170: Other Printing Methods
(Other Printing Methods) Section 1 Printing from AutoCAD ... 5-2 Section 2 Setting and Procedure for Automatic Printing via FTP ... 5-10 1-1 Printing from AutoCAD (Release 14) ... 5-2 1-2 Installing the Printer Driver for AutoCAD 2000i/2000 ... 5-6 Page 5-1...
Page 171: Part 5 Printing From Autocad
Section 1 Printing from AutoCAD Printing from AutoCAD (Release 14) The following uses the AutoCAD (Release 14) CAD (Computer-Aided Design) application from Autodesk, Ltd. of the United States as an example in explaining the procedure for performing print settings. Print Settings in AutoCAD Perform the following procedure to make print settings in AutoCAD.
Page 172 Page 5-3 A list of printer drivers for printers and plotters that AutoCAD supports will be displayed. Select from this list, for example [Kyocera Mita HP-GL/2 Driver ADI 4.3], and then click on [OK]. NOTE If the appropriate printer driver is not displayed, make sure that "DRV" is designated in the search...
Page 173 A text-based window like that shown below will open. Select "<N> network port" as the response to the last question "What is your KM-4850w connected to?" The [Browse for Printer] dialog box will open. Select "KM-Wide" in that dialog box. Click on [OK].
Page 174 Select "N=No" as the response to the question "Do you want to change anything?" Once the plotter settings are complete, the screen will return to the [Preferences] dialog box. Click on the [Set Current] button in order to set the added plotter as the default plotter. Page 5-5...
Page 175: Installing The Printer Driver For Autocad 2000I/2000
Printer drivers for both AutoCAD 2000i and AutoCAD 2000 are included with the CAD Master Controller. Perform the following procedure to install the printer driver for AutoCAD 2000. IMPORTANT Be sure to install the printer driver for your Windows environment BEFORE installing the printer driver for AutoCAD. Installation Procedure Perform the following procedure to install the printer driver.
Page 176 Double-click on the [Add-A-Plotter Wizard] icon in that folder. The [Add Plotter Introduction Page] window will open. Click on [Next] in that window. Select [My Computer] and then click on [Next]. Page 5-7...
Page 177 Page 5-8 It is necessary to select the printer driver that you want to install. Thus, if the accessory CD-ROM is not in the CD-ROM drive, insert it now and click on [Have Disk…].
Page 178 Select the [Heidi Information] file on the CD-ROM. • The printer driver for AutoCAD 2000i can be found under: D:\Drivers\English\Wide\AutoCAD\2000i\kmwide7.hif • The printer driver for AutoCAD 2000 can be found under: D:\Drivers\English\Wide\AutoCAD\2000\kmwide6.hif ("D" = Your CD-ROM drive) Click on [Open], select the copier with the CAD Master Controller installed in the resulting dialog box and then click on [Next].
Page 179: Section 2 Setting And Procedure For Automatic Printing Via Ftp
Section 2 Setting and Procedure for Automatic Printing via FTP The following procedure uses the [Auto Print] setting for an HP-GL/2 filter compatible HP-GL/2 file as an example in explaining how to print that file via FTP with the following print conditions: NOTE Compatible file formats HP-GL, HP-GL2, HP-RTL, Calcomp906/PCI, Calcomp907/PCI, CALS_G4 (TIFF6.0), DXF (AutoCAD...
Page 180 Once those settings are complete, click on the [Enter] button in that screen to save those settings. The following illustrates print out of an HP-GL/2 file named "sample.plt" from a UNIX Workstation and setting of the IP address for the copier-printer to "10.3.3.16" using "Administrator" as the login name. #ftp 10.3.3.16 Connected to 10.3.3.16.
Page 181 Transmit the HP-GL/2 data file. ftp> put sample.plt 200 PORT command successful. 150 Opening BINARY mode data connection for sample.plt. 226 Transfer complete. ftp: 175 bytes sent in 0.00Seconds 175000.00Kbytes/sec. Once file transfer is complete, end the FTP session with a "quit" command. ftp>...

Kyocera KM-4850w Operation Manual

Page 1-1 Part 1 Using Your Copier as a Printer (Windows 95/98/Me/Nt 4.0/2000)

Page 2-1 Part 2 Using Your Copier as a Scanner (Windows 95/98/Me/Nt 4.0/2000)

Page 3-1 Part 3 Using Your Copier as a Printer (Macintosh)

Page 4-1 Part 4 Accessory Utilities

Quick Links

Operation Guide

Chapters

Related Manuals for Kyocera KM-4850w

Summary of Contents for Kyocera KM-4850w

Table of Contents