Special Paper - Kyocera FS-C8500DN Operation Manual

Handling Paper
Whiteness: The contrast of the printed page depends on the whiteness
of the paper. Whiter paper provides a sharper, brighter appearance.
Quality control: Uneven sheet size, corners that are not square, ragged
edges, welded (uncut) sheets, and crushed edges and corners can cause
the machine to malfunction in various ways. A quality paper supplier
should take considerable care to ensure that these problems do not
occur.
Packaging: Paper should be packed in a sturdy carton to protect it from
damage during transport. Quality paper obtained from a reputable
supplier is usually correctly packaged.
Note You might see the printer emitting steam in the area around
the top tray if you use damp paper, but it is safe to continue
printing.

Special Paper

The following types of special paper can be used:
Paper Type to be Used
Overhead projector transparencies
Rough paper
Thin paper (60 to 64 g/m²)
Label
Recycled paper
Preprinted paper
Bond paper
Postcards
Colored paper
Prepunched paper
Letterhead
Envelopes
Coated paper
Thick paper (120 to 220 g/m²)
High-quality paper
Custom
Use paper that is sold specifically for use with copiers or printers (heat-
fusing type). When using transparencies, labels, thin paper, envelopes,
postcards, or thick paper, feed the paper from the MP tray. For details,
refer to Paper Settings on page 4-46.
Since the composition and quality of special paper vary considerably,
special paper is more likely than white bond paper to give trouble during
Paper Type to be Selected
TRANSPARENCY
ROUGH
VELLUM
LABELS
RECYCLED
PREPRINTED
BOND
CARDSTOCK
COLOR
PREPUNCHED
LETTERHEAD
ENVELOPE
COATED
THICK
HIGH QUALITY
CUSTOM 1~8
3-7