Message
Print overrun.
Replace the toner.
[C][M][Y][K]
Clean the printer.
Toner is running out.
[C][M][Y][K]
Top tray is full of
paper.
Remove the paper.
Unknown toner
installed.
Troubleshooting
Corrective Action
The data transferred to the printer was too complex to print on a page. Press
[OK] to resume printing.
Toner has run out in the toner container(s). Replace the toner container using a
new toner kit for the particular color. The printer does not operate when this
message is displayed.
For example, if Replace the toner.[C][K] is displayed, replace the cyan
and the black toner containers.
For details, refer to Toner Container Replacement on page 5-2.
Two messages are displayed alternately. The toner in the displayed color (C:
Cyan, M: Magenta, Y: Yellow or K:Black) has run low. Ensure that a new toner
container is available without delay. For details, refer to Toner Container
Replacement on page 5-2.
The top tray has become full (approx. 500 pages). You must remove all printed
pages from the top tray. When the printer detects that the top tray is empty again,
the printer will continues printing into the top tray.
Displayed when the installed toner is not the original Kyocera product. Install
original Kyocera toner.
6-9