Kyocera FS-C8500DN Operation Manual page 74

Function:
1 Paper Output
2
Duplex
3
Encrypted PDF
Paper Output:
1 *TopTray FaceDown
2
Tray A Face Down
3 Tray B Face UP
Function:
1
Paper Output
2
Duplex
3 Encrypted PDF
Duplex:
1 *Off
2 Bind Long Edge
3
Bind Short Edge
4-18
1
In the Copies menu or the Paper Selection menu, press
a b
[Function] ([Right Select]). The Function menu appears.
2
Press
3
Press [OK]. The Paper Output menu appears showing the
a b
available output locations.
Note The screen shown appears when a 3,000 Sheet Document
Finisher is installed.
4
Press
5
Press [OK]. The selected output location is stored and the Function
menu reappears.
Duplex (Setting the duplex printing)
Set duplex printing. For details, refer to Duplex (Setting the duplex
printing) on page 4-57.
1
In the Copies menu or the Paper Selection menu, press
a b
[Function] ([Right Select]). The Function menu appears.
2
Press
3
Press [OK]. The Duplex screen appears showing the list of
a b
available duplex printing modes.
4
Press
The message display toggles through the following:
Off (default)
Bind Long Edge
Bind Short Edge
Selecting Off disables duplex printing.
5
Press [OK]. The duplex printing mode is set and the Function menu
reappears.
or to select Paper Output.
or to select the desired output location.
or to select Duplex.
or to select the desired duplex printing mode.
Using the Operation Panel