Kyocera FS-C8500DN Operation Manual page 177

Maintenance
Toner Kits
For best results, we recommend that you only use genuine Kyocera Mita
Parts and Supplies.
The toner kits are supplied in 4 different colors: cyan, magenta, yellow
and black.
A new toner kit for each color contains the following items:
• Toner Container
• Waste Toner Box
• Plastic waste bags for old toner container and old waste toner box
• Installation Guide
Note Do not remove the toner container from the carton until you
are ready to install it in the printer.
Replacing the Toner Container
This section explains how to replace the toner containers. When
replacing the toner container of any color, always replace the waste toner
box at the same time. If this box is full, the printer may be damaged or
contaminated by the waste toner that may spill over the box.
CAUTION Do not attempt to incinerate the Toner
Container. Dangerous sparks may cause burns.
IMPORTANT During toner container replacement, temporarily move
storage media and computer supplies (such as floppy disks and USB
memories) away from the toner container. This is to avoid damaging
media by the magnetism of toner.
Always clean the inside of the printer after replacing the toner
container. For details, refer to Cleaning the Printer on page 5-8.
Kyocera Mita Corporation is not liable against any damages or
problems arising from the use of toner containers other than those
designated as original Kyocera Mita toner containers. For optimum
performance, it is also recommended to use only the Kyocera Mita
toner containers which are specifically intended for use in your
country or region. If the toner container for another destinations is
installed, the printer will stop printing.
Note You do not have to turn printer power off before starting the
replacement. Any data that may be processing in the printer will
be deleted if you turn the printer power off.
To replace the toner container, first make sure of the color of the toner
container requiring replacement. In this example, it is assumed that you
are replacing the black toner container.
1
Open the front cover.
5-3