Kyocera FS-C8500DN Operation Manual page 135

Stapling Limit:
1 *Ignore
2 Display Error
Punch Waste Full: a b
1 *Ignore
2 Display Error
Using the Operation Panel
Stapling Limit (Setting when the number of sheets exceeds the
stapling limit)
Select the setting when the number of printed sheets exceeds the number
of sheets that can be stapled.
Display • A message is displayed and printing stops.
Error
Ignore • A message is not displayed and printing continues without
1
In the Error Handling menu, press
Limit.
2
Press [OK]. The Stapling Limit screen appears.
a b
3
Press
4
Press [OK]. The handling of staple limit errors is set and the Error
Handling menu screen reappears.
Punch Waste Full (Setting when the punch waste box is full)
This setting can be specified when a punch unit is installed on the optional
3,000 Sheet Document Finisher. Select the setting when the punch waste
box becomes full and the message Empty the punch waste box. is
displayed during punching.
Display • A message is displayed and printing stops. Printing
Error
Ignore • A message is displayed, however, printing continues
1
In the Error Handling menu, press
Full.
2
Press [OK]. The Punch Waste Full screen appears.
3
Press
4
Press [OK]. The handling of punch waste full is set and the Error
Handling menu screen reappears.
stapling.
or to select the setting for handling staple limit errors.
automatically resumes when the punch waste is discarded
and the punch waste box is replaced in the punch unit.
without punching.
or to select the setting for handling punch waste full.
or to select Stapling
or to select Punch Waste
4-79