Kyocera FS-C8500DN Operation Manual page 70

4-14
1 Firmware Version
This item shows the version and release date of the printer
firmware.
2 Printer Settings Information
This item shows various printer settings for hardware-related
items:
- MP tray paper size and type
- Paper cassette size and type
- Copies
- EcoPrint
- Default Media Type
- Sleep time
- Formfeed timeout time
3 Installed Options
This item shows the options installed in the printer:
- Paper Feeder
- Finisher
- Mail Box
4 Network Status
This item shows the IP address, subnet mask address, and
default gateway address for the network interface card in the
printer.
5 Interface Information
This information shows the block status for items including the
USB memory slot and USB interface.
6 Memory
This item shows:
- Total memory in the printer
7 Emulation
This item shows all available emulations of the printer. The
KPDL (AUTO) emulation is set as default when the printer is
shipped from the factory. The emulations are:
- PCL 6
- KPDL
8 Page Information
This shows counter information. Total printed page count and
total page count of each paper size are shown, and are itemized
by color/monochrome/total for each counter.
9 Consumable Status
This item shows the approximate level of remaining toner. When
the value is 100, the toner container is full. The closer to 0, the
smaller the amount of remaining toner.
Using the Operation Panel