Kyocera FS-C8500DN Operation Manual page 107

Using the Operation Panel
Setting the Paper Thickness
You set the paper thickness by selecting a paper weight.
The available paper weights are as follows (grammages are provided as
a guide)
Extra Heavy (OHP)
Heavy 3 (163 to 220 g/m²)
Heavy 2 (128 to 163 g/m²)
Heavy 1 (105 to 128 g/m²)
Normal 3 (90 to 105 g/m²)
Normal 2 (75 to 90 g/m²)
Normal 1 (60 to 75 g/m²)
Light (60 to 64 g/m²)
Change the weight of each media type so that the optimum print result is
obtained. The default setting for each media type is shown below.
Media Type
Plain
Transparency
Preprinted
Labels
Bond
Recycled
Rough
Vellum
Letterhead
Color
Prepunched
Envelope
Cardstock
Coated
Thick
HighQuality
CUSTOM1 to 8
Use the procedure below to set the paper weight.
(For the procedure for setting weights for custom paper (CUSTOM 1 to
8), refer to Custom Paper Settings on page 4-52.)
Paper Weight
Normal 2
Extra Heavy
Normal 2
Heavy 1
Normal 3
Normal 2
Normal 3
Light
Normal 2
Normal 2
Normal 2
Heavy 2
Heavy 2
Normal 3
Heavy 2
Normal 2
Normal 2
4-51