2-3. Adjusting Color
●
To select the display mode (CAL Switch mode)
This function allows easy selection of a desired mode according to monitor application.
Display Modes
Mode
Custom
sRGB
Text
DICOM
Movie
Procedure
1. Press
or
A mode name appears at the lower left of the screen.
2. Change the mode by pressing
Note
• The Adjustment menu cannot be displayed when a mode name appears.
●
To perform advanced adjustments
The <Color> menu of the Adjustment menu allows you to configure and save a separate set of color settings
for each mode.
Attention
• The monitor will take about 30 minutes before its internal electric components stabilize. Wait 30 minutes or more
after turning the monitor power on before starting adjustment.
• Perform the range adjustment first when adjusting color for analog signals (see
automatically <Range>" (page
• The same image may be seen in different colors on multiple monitors due to their monitor-specific characteristics.
Make fine color adjustment visually when matching colors on multiple monitors.
Note
• The values shown in "%" or "K" are available only as reference.
Availableformakingdesiredsetting.
SuitableforcolormatchingwithsRGBcompatibleperipherals.
Suitablefordisplayingtextsforwordprocessingorspreadsheets.
AvailabletodisplayinDICOMmode.
Suitableforplayingbackanimatedimages.
Displaysthecurrentmode.
.
or
while the mode name is displayed.
→Custom←→sRGB←→Text←→DICOM←→Movie←
14)).
Purpose
"To adjust color gradation
Chapter2AdjustingScreens
15