Table of Contents
Advertisement
2-3. Adjusting Color
●
Selecting the display mode (CAL Switch mode)
A desired mode can be selected easily according to the monitor application.
Display Modes
√: Available, -: Not available
Mode
1-DICOM
2-Custom
3-CAL
4-Text
Procedure
1. Press
.
The mode menu appears at the bottom left of the screen.
2. The mode among the list is highlighted in turn each time
You can switch the mode with
Note
• The Adjustment menu and the Mode menu cannot be displayed at the same time.
●
Performing advanced adjustments
"Color" of the Adjustment menu allows you to configure and save a separate set of color settings for
each mode.
Attention
• It takes about 30 minutes for the performance of electrical parts to stabilize. Please wait 30 minutes or more
after the monitor power has been turned on or the monitor has recovered from the power saving mode, and
then adjust the monitor.
• The same image may be seen in different colors on multiple monitors due to their monitor-specific
characteristics. Make fine color adjustment visually when matching colors on multiple monitors.
Note
• The values shown in "%" or "K" are available only as reference.
8
Chapter 2 Adjusting Screens
Available to display in DICOM mode.
Available for the setting according to your preference.
Displays the screen adjusted by calibration software.
Suitable for displaying texts for word processing or spreadsheets.
The mode menu
appears.
or
while the mode menu is displayed.
→1-DICOM←→2-Custom←→3-CAL←→4-Text←
Purpose
is pressed.
Calibration
√
√
√
-
Advertisement
Table of Contents
