Displaying Screen Correctly; Digital Signal Input; Analog Signal Input - Eizo RADIFORCE MS230W User Manual

2-2. Displaying Screen Correctly

●

Digital Signal Input

When digital signals are input, images are displayed correctly based on the preset data of the monitor, but if
characters and/or lines appear blurred, go to
When performing more advanced adjustment, see
●

Analog Signal Input

Attention
• The monitor will take about 30 minutes before its internal electric components stabilize. Wait 30 minutes or more
after turning the monitor power on before starting adjustment.
• The Self Adjust (automatic screen adjustment) function does not work for the images under the resolution of 800 ×
600 (SVGA).
The monitor screen adjustment is used to suppress flickering of the screen or adjust screen position and
screen size correctly according to the PC to be used.
Note
• The Self Adjust function works when all of the following conditions are satisfied:
- When a signal is input into the monitor for the first time or when a resolution or vertical/horizontal scan frequency
not used before is set
If the screen is not displayed correctly even after performing the Self Adjust operation, adjust the screen
according to the procedures on the following pages to use the monitor comfortably.
Setting Procedures
1.
Perform the auto adjustment.
●
To adjust flickering, screen position, and screen size automatically <Screen>
Procedure
1. Choose <Auto Adjustment> from the Adjustment menu, and press
2. Choose <Screen> from the <Auto Adjustment> menu, and press
The <Auto Adjustment> menu appears.
3. Select <Execute> with
Flickering, screen position, and screen size are corrected by the auto-adjustment function.
Attention
• This function works correctly when an image is fully displayed over the Windows or Macintosh display area. It does
not work properly when an image is displayed only on a part of the screen (command prompt window, for example)
or when a black background (wallpaper, etc.) is in use.
• This function does not work correctly with some graphics boards.
Ifthescreenisnotdisplayedcorrectlyevenafterperforming"1.Performtheautoadjustment."(page11),
performtheadjustmentsaccordingtotheproceduresonthefollowingpages.Ifthescreenisdisplayed
correctly,goto"5.Adjustingcolorgradation."(page14).
"6. Modify blurred characters or lines." (page
"2-3. Adjusting Color" (page 15)
or , and press .
14).
and subsequent pages.
.
.
Chapter2AdjustingScreens
11