Mac Os X 10.7; Adjusting Color; Selecting The Display Mode (Cal Switch Mode); Performing Advanced Adjustments - Eizo RadiForce MX191 Installation Manual

●

Mac OS X 10.7

1. Select "System Preferences" from the Apple menu.
2. When the "System Preferences" dialog box is displayed, click "Displays" for "Hardware".
3. On the displayed dialog box, select the "Display" tab and select desired resolution in the
"Resolutions" field.
4. Your selection will be reflected immediately. When you are satisfied with the selected resolution,
close the window.

2-3. Adjusting Color

●

Selecting the Display Mode (CAL Switch Mode)

A desired mode can be selected easily according to the monitor application.
Display Modes
Mode
(DICOM-CL)
(TXT)
(CUS)
(CAL)
Procedure
1. Press .
The adjustment menu appears.
2. Press again while the adjustment menu is displayed.
Each time you press the button, the mode is switched.
3. Select .
The mode selected is set.
Note
• You can also select the CAL Switch mode by pressing
●

Performing Advanced Adjustments

Independent setting and saving of color adjustment are available for each CAL Switch mode.
Attention
• It takes about 30 minutes for the performance of electrical parts to stabilize. Please wait 30 minutes or more
after the monitor power has been turned on or the monitor has recovered from the power saving mode, and
then adjust the monitor.
• Perform (AutoRange) first when adjusting color for analog input signals. (See
automatically" (page
• The same image may be seen in different colors on multiple monitors due to their monitor-specific
characteristics. Make fine color adjustment visually when matching colors on multiple monitors.
Note
• The values shown in "%" or "K" are available only as reference.
8
Chapter 2 Adjusting Screens
DICOM-CL mode. Available for setting tailored to X-ray film color (clear base).
Text mode. Suitable for displaying texts for word processing or spreadsheets.
Custom mode. Available for the color settings according to your preference.
CAL mode. Displays the screen adjusted by calibration software.
→ DICOM-CL → TXT → CUS → CAL →
16).)
Purpose
and select (Color).
"To adjust color gradation