Chapter 1 Introduction; Features - Eizo RADIFORCE MS230W User Manual

Chapter 1 Introduction

Thank you very much for choosing an EIZO color LCD monitor.

1-1. Features

• 23" wide format LCD
• Applicable to the resolution of 1920 × 1080.
• Uses high-contrast panel (3000:1).
Enables the display of sharp images.
• VA panel with 89° horizontal and vertical viewing angles
• Applicable to DisplayPort (applicable to 8 bit)*
The image signal and audio signal can both be transmitted via a single DisplayPort cable.
* WhentransmittinganaudiosignalusingtheDisplayPortcable,thegraphicsboardmustbecompatible
withaudiooutput(See"6-5.Specifications"(page39)).
• CAL Switch function for selecting an optimal calibration mode
See "To select the display mode (CAL Switch mode)" (page
• Selectable DICOM
• Frame Synchronous mode supported (59 - 61 Hz).
• Power saving function.
This product is equipped with various power saving functions.
- EcoView Sense function
The sensor on the front side of the monitor detects the movement of a person. When a person moves away from the
monitor, it shifts to the power saving mode automatically and does not display the images on the screen. Therefore,
the function reduces the power consumption.
See "4-5. Shifting to the power saving mode when a person leaves the monitor "EcoView Sense"" (page
- EcoView Index function
The green indicator shows the power consumption ratio responding to the brightness of the monitor. You can
realize the power consumption reduction by taking consideration in the ratio of power saving.
See "4-4. Setting Indicator "EcoView Index"" (page
• Portrait/Landscape display available.
• HDCP (High-bandwidth Digital Content Interface)
• Built-in speakers and headphone jack
Note
• This monitor supports the Portrait/Landscape display. This function allows you to change the orientation of
the Adjustment menu when using the monitor screen in vertical display position (See
<Orientation>" (page
• For using the monitor with "Portrait" position, the graphics board supporting portrait display is required. When
placing the monitor in a "Portrait" position, settings of your graphics board need to be changed. Refer to the manual
of the graphics board for details.
• The stand of the unit can be replaced with an arm or another stand (See
34))..
(page 42) Part 14 complied screen.
24)).
15).
28).
"6-1. How to Attach the Optional Arm" (page
29).
"3-6. Setting Orientation
Chapter1Introduction
7