Eizo RADIFORCE MS230W User Manual page 13

●
To remove flickering or blurring <Phase>
Procedure
1. Choose <Phase> from the <Screen> menu, and press
The <Phase> menu appears.
2. Adjust the phase with
3. Press to exit the adjustment.
When vertical bars appear on the screen after adjustment, go back to "To eliminate vertical bars <Clock>".
(Clock → Phase → Position)
Attention
• Flickering or blurring may not be eliminated depending on your PC or graphics board.
●
To correct the screen position <Position>
Note
• Since the number of pixels and the pixel positions are fixed on the LCD monitor, only one position is provided to
display images correctly. The position adjustment is made to shift an image to the correct position.
Procedure
1. Choose <Position> from the <Screen> menu, and press
The <Position> menu appears.
2. Adjust the position with
3. Press to exit the adjustment.
4. Close Pattern 1.
or to minimize flickering or blurring.
/ / / .
.
.
Chapter2AdjustingScreens
13