Chapter 4 Power Saving Functions; Setting Power Saving <Power Save; Monitor - Eizo RADIFORCE MS230W User Manual

Chapter 4 Power Saving Functions

4-1. Setting Power Saving <Power Save>
●

Monitor

This function allows you to set the monitor into the power saving mode according to the PC status. When the
monitor has shifted to the power saving mode, the images on the screen are not displayed.
Attention
• Turning off the main power switch or unplugging the power cord completely shuts off power supply to the monitor.
• Power consumption varies even when the stereo mini jack cable is connected.
• Five seconds before the monitor enters the power saving mode, it displays a preliminary message.
Procedure
1. Choose <PowerManager> from the Adjustment menu, and press
2. Choose <Power Save> from the <PowerManager> menu, and press
The <Power Save> menu appears.
3. Select "On" or "Off" with
4. Press to exit the adjustment.
Power Saving System
Analog Signal Input
This monitor complies with the VESA DPM standard.
On
Powersaving
mode
PowerOff
Digital Signal Input
DVI
This monitor complies with the DVI DMPM standard.
DisplayPort
This monitor complies with the DisplayPort Standard V1.1a.
The monitor enters the power saving mode in five seconds in connection with the PC setting.
On
Powersavingmode
26
Chapter4PowerSavingFunctions
or .
PC
Operating
STAND-BY Powersavingmode
SUSPENDED
OFF
Powersavingmode
PC
Operating
Powersavingmode
.
Power
Monitor
Indicator
Blue
Orange
Orange
Power
Monitor
Indicator
Blue
Orange
.