Eizo RADIFORCE MS230W User Manual page 12

2.
Prepare to use analog screen adjustment patterns.
Download the "Screen adjustment pattern files" from our site: http://www.radiforce.com.
Note
• For details and instructions on opening the "Screen adjustment pattern files", refer to the Readme.txt file.
3.
Perform the auto adjustment again with the analog screen adjustment pattern
displayed.
●
To adjust flickering, screen position, and screen size automatically <Screen>
Procedure
1. Display Pattern 1 in full screen on the monitor using the "Screen adjustment pattern files".
2. Choose <Auto Adjustment> from the Adjustment menu, and press
3. Choose <Screen> from the <Auto Adjustment> menu, and press
The <Auto Adjustment> menu appears.
4. Select <Execute> with
Flickering, screen position, and screen size are corrected by the auto-adjustment function.
Ifthescreenisnotdisplayedcorrectlyevenafterperforming"3.Performtheautoadjustmentagain
withtheanalogscreenadjustmentpatterndisplayed."(page12),performtheadjustmentsaccordingto
theproceduresonthefollowingpages.Ifthescreenisdisplayedcorrectly,goto"5.Adjustingcolor
gradation."(page14).
4.
Choose <Screen> from the Adjustment menu to perform advanced
adjustments.
Adjust the clock, phase and position, in this order.
●
To eliminate vertical bars <Clock>
Procedure
1. Choose <Clock> from the <Screen> menu, and press
The <Clock> menu appears.
2. Adjust the clock with
Press or
3. Press to exit the adjustment.
When blurring, flickering or bars appear on the screen after adjustment, proceed to "Phase" to remove flickering or
blurring.
12
Chapter2AdjustingScreens
or , and press
or to eliminate vertical bars.
slowly so as not to miss the adjustment point.
.
.
.
.