Audio Output; Setting Power Indicator <Power Indicator; Enabling/Disabling Automatic Brightness Adjustment "Auto Ecoview - Eizo RADIFORCE MS230W User Manual

●

Audio Output

This monitor allows you to turn off the audio output from the speakers/headphone at the power saving mode.
Procedure
1. Choose <Sound> from the Adjustment menu, and press
2. Choose <Power Save> from the <Sound> menu, and press
The <Power Save> menu appears.
3. Select "On" or "Off" with
4. Press to exit the adjustment.
Attention
• No audio is output while the monitor is in the Power Saving mode, if input signal and sound source are of
DisplayPort.
4-2. Setting Power Indicator <Power Indicator>
This function allows you to set the power indicator (blue) ON/OFF in the monitor ON condition.
Procedure
1. Choose <Others> from the Adjustment menu, and press
2. Choose <Power Indicator> from the <Others> menu, and press
The <Power Indicator> menu appears.
3. Select "Enable" or "Disable" with
4. Press to exit the adjustment.
4-3. Enabling/Disabling Automatic Brightness
Adjustment "Auto EcoView"
The sensor on the front side of the monitor detects the environmental brightness to adjust the screen brightness
automatically and comfortably by using the Auto EcoView function.
Attention
• The Auto EcoView function cannot be used in the DICOM mode.
• Be careful not to block the sensor on the lower side of the monitor when using the Auto EcoView function.
Procedure
1. Press .
The "EcoView" menu appears.
2. Choose "Auto EcoView" with
3. Select "On" or "Off" with
4. Press to exit the adjustment.
Note
• For this reason, as <Brightness> in the Adjustment menu is changed, the auto adjustment range is also changed.
or .
or .
or . (Alternatively, you can use
or .
.
.
.
.
to select it.)
Chapter4PowerSavingFunctions
27