Table of Contents
Advertisement
2 | Adjusting the Screen
Function
Gamma
Hue
Saturation
Gain
Reset
2.4.2 Adjusting the brightness
The screen brightness is adjusted by changing the brightness of the backlight (light source
from the LCD back panel).
Settings: "0%" – "100%"
1. Select "CAL Switch Mode" from the Setting menu, then select
2. Select "Brightness" and then
3. Specify the setting using
4. Select
2.4.3 Enabling or disabling Hybrid Gamma PXL
When the Hybrid Gamma PXL function is enabled, this product automatically differentiates
between monochrome and color parts of the same image at a pixel level, and displays a
color image using the gamma value for color image display.
Settings: "On" / "Off"
1. Select "CAL Switch Mode" from the Setting menu, then select
2. Select "Hybrid Gamma PXL" and then
3. Select "On" or "Off", then select
2.4.4 Adjusting the contrast
The brightness of the screen is adjusted by varying the video signal level.
Settings: "0%" – "100%"
1. Select "CAL Switch Mode" from the Setting menu, then select
2. Select "Contrast" and then
3. Specify the setting using
4. Select
Note
• When the contrast is set to 100 %, all the color gradations are shown.
• When adjusting the monitor, it is recommended to perform brightness adjustment, which does
not lose gradation characteristics, prior to contrast adjustment.
• Perform contrast adjustment in the following cases:
– If the screen is too bright even when the brightness is set to 0 %
2.4.5 Adjusting the color temperature
Adjusts the color temperature.
The color temperature is normally used to express the hue of "White" and/or "Black" with a
numerical value. The value is expressed in degrees "K" (Kelvin).
10
1-DICOM 2-CAL1
or
after completing the setting.
.
or
after completing the setting.
CAL Switch Mode
3-CAL2
-
-
-
-
-
-
-
-
✓
✓
✓
.
.
.
.
.
4-
5-sRGB
Custom
-
✓
✓
-
✓
✓
-
✓
✓
-
✓
✓
✓
✓
.
.
.
6-Text
✓
✓
✓
✓
✓
Advertisement
Table of Contents
