Enabling/Disabling Ddc/Ci Communication; Resetting The Monitor To The Default Settings <Reset; To Reset The Color Adjustments; To Reset All Adjustments To The Default Settings - Eizo RADIFORCE MS230W User Manual

3-8. Enabling/Disabling DDC/CI communication

This function allows you to enable/disable the DDC/CI communication (see
Procedure
1. Press to turn off the monitor.
2. Press holding
You can toggle between Enable and Disable by performing steps 1 and 2.
Note
• You can check the DDC/CI setting in the <Information> menu.
3-9. Resetting the Monitor to the Default Settings
<Reset>
There are two different Resets: Color Reset for only resetting the color adjustments to the default settings and
Full Reset for resetting all settings to the defaults.
Attention
• After resetting, you cannot undo the operation.
Note
• Regarding the default setting, see
●

To reset the color adjustments

This function only resets the color adjustments for the currently selected mode to the default settings.
Procedure
1. Choose <Color> from the Adjustment menu, and press
2. Choose <Reset> from the <Color> menu, and press
3. Select "Reset" with
4. Press .
The color adjustments revert to the default settings.
●

To reset all adjustments to the default settings

This function resets all adjustments to the default settings.
Procedure
1. Choose <Others> from the Adjustment menu, and press
2. Choose <Reset> from the <Others> menu, and press
3. Select "Reset" with
4. Press .
All adjustments revert to the default settings.
down to turn on the monitor.
"Main Default Settings" (page
or .
or .
"6-6. Glossary" (page
40).
.
.
.
.
Chapter3SettingMonitor
42)).
25