To Adjust Gain <Gain; To Set Overdrive Intensity <Overdrive - Eizo RADIFORCE MS230W User Manual

●
To adjust gain <Gain>
The brightness of each color component red, green, and blue is called "Gain". You can change the hue of
"white" by adjusting gain.
Adjustable range
0 to 100%
Procedure
1. Choose <Color> from the Adjustment menu, and press
2. Choose <Gain> from the <Color> menu, and press
The <Gain> menu appears.
3. Adjust gain with
4. Press to exit the adjustment.
Attention
• Using this function may make some color gradations unavailable for display.
Note
• The value of gain changes with that of color temperature.
• When gain is changed, the color temperature is changed to "Off".
●
To set overdrive intensity <Overdrive>
This function allows you to set overdrive intensity based on the use of the monitor. You can reduce Image
lags by setting it to "Enhanced" when displaying animated images.
Adjustable range
Enhanced, Standard, Off
Procedure
1. Choose <Color> from the Adjustment menu, and press
2. Choose <Overdrive> from the <Color> menu, and press
The <Overdrive> menu appears.
3. Use or for adjustment.
4. Press to exit the adjustment.
Attention
• The overdrive function is disabled in the following cases:
- The vertical scan frequency of input signals is more than 60 Hz.
- Select "Normal" during <Screen Size> (excluding the case that display resolution is 1920 × 1080).
or for each of red, green, and blue.
.
.
.
.
Chapter2AdjustingScreens
19