Attaching The Flexstand - Eizo RADIFORCE MS230W User Manual

6-2. Attaching the FlexStand

The once removed the FlexStand can be attached to the monitor again with the following procedures.
1.
Put the insertion part of the stand in the slot of the monitor.
At the time, use as a guide that the marks (1) on the stand match to the screw holes (2) of the monitor.
2.
Attach the stand moving the monitor toward the stand.
Make sure that the lock is latched with clicking sound shown in the figure below.
36
Chapter6Reference
Screwhole
Marks
Incorrect Correct