Microphone Mute; Multiple Line Keys Per Registration - Polycom SoundPoint IP 601 Administrator's Manual

Administrator Guide - SoundPoint
the configuration syntax is the same as that specified in 2.1.5 of RFC 3435. The phone
behavior when the user dials digits that do not match the digit map is configurable. It
is also possible to strip a trailing # from the digits sent.
Central
(boot
server)
Local

3.1.19 Microphone Mute

A microphone mute feature is provided. When activated, visual feedback is provided.
This is a local function and cannot be overridden by the network.

3.1.20 Multiple Line Keys per Registration

More than one line key can be allocated to a single registration (phone number or line).
The number of line keys allocated per registration is configurable.
Central
(boot
server)
® ®
IP / SoundStation IP
Configuration file:
sip.cfg
Configuration file:
phone1.cfg
Web Server
(if enabled)
Local Phone User
Interface
Configuration file: Specify the number of line keys to assign per registration.
phone1.cfg
•
Copyright © 2005 Polycom, Inc.
Specify impossible match behavior, trailing # behavior,
digit map matching strings, and time out value.
• For more information, see 4.6.1.2 Dial Plan <dial-
plan/> on page 77.
Specify per-registration impossible match behavior,
trailing # behavior, digit map matching strings, and time
out values that override those in sip.cfg.
• For more information, see 4.6.2.4 Dial Plan <dial-
plan/> on page 135.
Specify impossible match behavior, trailing # behavior,
digit map matching strings, and time out value.
Navigate to: http://<phoneIPAddress>/appConf.htm#ls
Changes are saved to local flash and backed up to
<Ethernet address>-phone.cfg on the boot server.
Changes will permanently override global settings unless
deleted via the Reset User Settings menu selection.
None.
For more information, see 4.6.2.1 Registration <reg/>
on page 128.
Features
33