Polycom SoundPoint IP 601 Administrator's Manual page 81

Administrator Guide - SoundPoint
4.6.1.1.3 SIP <SIP/>
Attribute
voIpProt.SIP.useRFC2543hold
voIpProt.SIP.lcs
voIpProt.SIP.sendCompactHdrs
voIpProt.SIP.WM50
voIpProt.SIP.keepalive.session-
Timers
voIpProt.SIP.request-
URI.E164.addGlobalPrefix
voIpProt.SIP.allowTransferOn-
Proceeding
® ®
IP / SoundStation IP
Permitted
Values
0, 1
0, 1
0, 1
0, 1
0, 1
0, 1
0, 1
Copyright © 2005 Polycom, Inc.
Default Interpretation
0 If set to 1, use the obsolete c=0.0.0.0
RFC2543 technique, otherwise, use
SDP media direction attributes (such as
a=sendonly) per RFC 3264 when initi-
ating hold. In either case, the phone
processes incoming hold signaling in
either format.
0 If set to 1, the proprietary "epid"
parameter is added to the From field of
all requests to support Windows Live
Communications Server.
0 If set to 0, SIP header names generated
by the phone use the long form, for
example 'From'.
If set to 1, SIP header names generated
by the phone use the short form, for
example 'f'.
0
If set to 1, Windows Messenger
will be supported.
If set to 0, Windows Messenger
will be supported.
0 If set to 1, the session timer will be
enabled.
If set to 0, the session timer will be dis-
abled, and the phone will not declare
"timer" in "Support" header in
INVITE. The phone will still respond
to a re-INVITE or UPDATE. The
phone will not try to re-INVITE or do
UPDATE even if remote endpoint asks
for it.
0 If set to 1, '+' global prefix is added to
E.164 user parts in sip: URIs:.
1 If set to 1, a transfer can be completed
during the proceeding state of a consul-
tation call. This is the default.
If set to 0, a transfer is not allowed dur-
ing the proceeding state of a consulta-
tion call.
Optimization
®
5.0
®
4.7
73