Web Server <Httpd - Polycom SoundPoint IP 601 Administrator's Manual

Administrator Guide - SoundPoint
Attribute
tcpIpApp.port.rtp.forceSend
tcpIpApp.port.rtp.mediaPortRangeStart
4.6.1.11 Web Server <HTTPD/>
The phone contains a local web server for user and administrator features. This can be
disabled for applications where it is not needed or where it poses a security threat. The
web server supports both basic and digest authentication. The authentication user
name and password are not configurable for this release.
Attribute
httpd.enabled
4.6.1.11.1 Configuration <cfg/>
Attribute
httpd.cfg.enabled
® ®
IP / SoundStation IP
Permitted
Values
Null, 1024-
65534
Null, even
integer from
1024-65534
Permitted
Values Default
0, 1 1
Permitted
Values Default
0, 1 1
Copyright © 2005 Polycom, Inc.
Default Interpretation
Null When non-Null, send all
RTP packets to, and expect
all RTP packets to arrive on,
the specified port.
Note: both tcpI-
pApp.port.rtp.filterByIp and
tcpIpApp.port.rtp.filterBy-
Port must be enabled for this
to work.
Null If set to Null, the value 2222
will be used for the first allo-
cated RTP port, otherwise,
the specified port will be
used. Subsequent ports will
be allocated from a pool
starting with the specified
port plus two up to a value
of (start-port + 46), after
which the port number will
wrap back to the starting
value.
Interpretation
If set to 1, the HTTP server will be enabled.
Interpretation
If set to 1, the HTTP server configuration
interface will be enabled.
Optimization
107