Polycom SoundPoint IP 601 Administrator's Manual page 113

Administrator Guide - SoundPoint
• stop DST on the last Sunday in October at 2 am.
Attribute
tcpIpApp.sntp.resyncPeriod
tcpIpApp.sntp.address
tcpIpApp.sntp.gmtOffset
tcpIpApp.sntp.daylightSavings.enable
tcpIpApp.sntp.daylightSavings.fixedDay-
Enable
tcpIpApp.sntp.daylightSavings.start.month
tcpIpApp.sntp.daylightSavings.start.date
tcpIpApp.sntp.daylightSavings.start.time
tcpIpApp.sntp.daylightSavings.start.dayOf-
Week
tcpIpApp.sntp.daylightSavings.start.dayOf-
Week.lastInMonth
tcpIpApp.sntp.daylightSavings.stop.month
® ®
IP / SoundStation IP
a
Copyright © 2005 Polycom, Inc.
Permitted
Values Default
positive 86400
integer (24
hours)
valid host clock
name or IP
address
positive or -28800
negative (Pacific
integer time)
0, 1 1
0, 1 0
1-12 4 (April)
1-31 1
0-23 2
1-7 1
0, 10 0
1-12 10
Optimization
Interpretation
Time in seconds
between SNTP re-
syncs.
Address of the SNTP
server.
Offset in seconds of the
local time zone from
GMT.
Note: 3600 seconds per
hour
If set to 1, apply day-
light savings rules to
displayed time.
If set to 1, "April 1st" is
used, otherwise "the
first Sunday in April" is
used.
Month to start DST.
1=Jan, 2=Feb, ...,
12=Dec
Day of the month to
start DST.
Time of day to start
DST, in 24 hour clock.
2=2 am, 14=2 pm
Day of week to apply
DST. 1=Sun, 2=Mon,
..., 7=Sat
If set to 1 and fixedDay-
Enable=0, start DST on
the last day of the week
(specified by dayOf-
Week) in the month,
rather than the first in
the month.
Month to stop DST.
1=Jan, 2=Feb, ...,
12=Dec
105