Polycom SoundPoint IP 601 Administrator's Manual page 38

Administrator Guide - SoundPoint
Central
(boot
server)
Local
30
® ®
IP / SoundStation IP
Configuration file:
sip.cfg
XML file:
000000000000-direc-
tory.xml
XML file: <Ethernet
address>-directory.xml
Web Server
(if enabled)
Local Phone User
Interface
Copyright © 2005 Polycom, Inc.
Set whether the directory uses volatile storage on the
phone (required on the IP 500 platform for directories
greater than 25 entries).
• For more information, see 4.6.1.13 Directory
<directory/> on page 110.
A sample file named 000000000000-directory~.xml
(Note extra "~" in the file name) is included with the
application file distribution. This file can be used as a
template for the per-phone <Ethernet address>-direc-
tory.xml directories (edit contents then rename to
<Ethernet address>-directory.xml). It also can be used
to seed new phones with an initial directory (edit con-
tents than remove "~" from file name). Telephones
without a local directory, such as new units from the fac-
tory, will download the 00000000000-directory.xml
directory and base their initial directory on it. These
files should be edited with an XML editor.
• For information on file format, see 3.1.17.1 Local
Contact Directory File Format on page 31.
This file can be created manually using an XML editor.
• For information on file format, see 3.1.17.1 Local
Contact Directory File Format on page 31.
None.
The user can edit the directory contents at will. Changes
will be stored in the phone's flash file system and
backed up to the boot server copy of <Ethernet
address>-directory.xml if this is configured. When the
phone boots, the boot server copy of the directory, if
present, will overwrite the local copy.
Features