Multiple Registrations - Polycom SoundPoint IP 601 Administrator's Manual

Administrator Guide - SoundPoint
and 601). A message-waiting signal from a voicemail server will trigger the message-
waiting indicator to flash.
Central
(boot
server)
Local

3.6.2 Multiple Registrations

SoundPoint
®
tion
a maximum of two registrations, the SoundPoint
the SoundPoint
56
®
IP / SoundStation
Configuration file:
sip.cfg
Configuration file:
phone1.cfg
Web Server
(if enabled)
Local Phone User
Interface
®
IP phones support multiple registrations per phone and the SoundSta-
IP 4000 supports a single registration. The SoundPoint
® IP 600 and 601 support six. With the attachment of one or more
Copyright © 2005 Polycom, Inc.
®
IP
For one-touch voicemail access, enable the "one-touch
voicemail" user preference.
• For more information, see 4.6.1.4 User Preferences
<user_preferences/> on page 82.
For one-touch voicemail access, choose to bypass instant
messages to remove the step of selecting between instant
messages and voicemail after pressing the Messages key on
®
the SoundPoint IP 500, 501, 600 and 601 (instant mes-
sages are still accessible from the Main Menu).
On a per-registration basis, specify a subscribe contact for
solicited NOTIFY applications, a callback mode (self call-
back or another contact), and the contact to call when the
user accesses voicemail.
• For more information, see 4.6.2.5 Messaging <msg/>
on page 137.
For one-touch voicemail access, enable the "one-touch
voicemail" user preference and choose to bypass instant
messages to remove the step of selecting between instant
messages and voicemail after pressing the Messages key on
®
the SoundPoint IP 500, 501, 600 and 601 (instant mes-
sages are still accessible from the Main Menu).
Navigate to: http://<phoneIPAddress>/coreConf.htm#us
On a per-registration basis, specify a subscribe contact for
solicited NOTIFY applications, a callback mode (self call-
back or another contact) to call when the user accesses
voicemail.
Navigate to: http://<phoneIPAddress>/reg.htm
Changes are saved to local flash and backed up to <Ethernet
address>-phone.cfg on the boot server. These changes will
permanently override global settings unless deleted via the
Reset User Settings menu selection.
None.
®
IP 500 and 501 support three and
Features
®
IP 300 and 301 support