Protocol <Volpprot - Polycom SoundPoint IP 601 Administrator's Manual

Administrator Guide - SoundPoint
4.6.1.1 Protocol <volpProt/>
4.6.1.1.1 Local <local/>
Attribute
volpProt.local.port
4.6.1.1.2 Server <server/>
Attribute
voIpProt.server.x.address
voIpProt.server.x.port
® ®
IP / SoundStation IP
Permitted
Values Default
0 to 65535 5060
Permitted
Values
dotted-decimal
IP address or
host name
0, Null, 1 to
65535
Copyright © 2005 Polycom, Inc.
Interpretation
Local port for sending and receiving SIP signaling
packets.
If set to 0 or Null, 5060 is used for the local port but
it is not advertised in the SIP signaling.
If set to some other value, that value is used for the
local port and it is advertised in the SIP signaling.
Default Interpretation
Null IP address or host name and
port of a SIP server that accepts
registrations. Multiple servers
can be listed starting with x=1,
Null
2, ... for fault tolerance.
If port is 0 or Null:
If voIpProt.server.x.address is a
hostname and voIp-
Prot.server.x.transport is set to
DNSnaptr, do NAPTR then
SRV lookups.
If voIpProt.server.x.transport is
set to TCPpreferred or
UDPonly then use 5060 and
don't advertise the port number
in signalling.
If voIpProt.server.x.address is
an IP address, there is no DNS
lookup and 5060 is used for the
port but it is not advertised in
signaling.
If port is 1 to 65535:
This value is used and it is
advertised in signaling.
Optimization
71