Polycom SoundPoint IP 601 Administrator's Manual page 129

Administrator Guide - SoundPoint
Attribute
log.render.file.size
log.render.file.upload.period
log.render.file.upload.append
log.render.file.upload.append.sizeLimit
log.render.file.upload.append.limit-
Mode
4.6.1.18.2 Scheduled Logging Parameters <scheduled/>
The phone can be configured to schedule certain advanced logging tasks on a periodic
basis. These attributes should be set in consultation with Polycom. Each scheduled
log task is controlled by a unique attribute set starting with log.sched.x where x identi-
fies the task.
Attribute
log.sched.x.name
log.sched.x.level
® ®
IP / SoundStation IP
Permitted
Values
positive
integer
positive
integer
0, 1
positive
integer
delete, stop
Permitted
Values Interpretation
alphanu- Name of an internal system command to be periodically
meric string executed. To be supplied by Polycom.
0-5 Event class to assign to the log events generated by this
command. This needs to be the same or higher than
log.level.change.slog for these events to appear in the log.
Copyright © 2005 Polycom, Inc.
Default Interpretation
16 Maximum local application
log file size in Kbytes. When
this size is exceeded, the file is
uploaded to the boot server
and the local copy is erased.
172800 Time in seconds between log
file uploads to the boot server.
Note: The log file will not be
uploaded if no new events
have been logged since the last
upload.
1 If set to 1, use append mode
when uploading log files to
server.
Note: HTTP and TFTP don't
support append mode unless
the server is set up for this.
512 Maximum log file size on boot
server in Kbytes.
delete Behavior when server log file
has reached its limit.
delete=delete file and start
over
stop=stop appending to file
Optimization
121