Keys <Keys - Polycom SoundPoint IP 601 Administrator's Manual

Administrator Guide - SoundPoint
4.6.1.14.2 IP_600 font <IP_600/>
Attribute
font.IP_600.x.name
4.6.1.15 Keys <keys/>
These settings control the scrolling behavior of keys and can be used to change key
functions.
Attribute
key.scrolling.timeout
SoundPoint
factory defaults, although this is typically not necessary. For each key whose function
you wish to change, add an XML attribute in the format described in the following
table to the <keys .../> element of the configuration file. These will override the built-
in assignments.
Remapping the arrow keys is not recommended.
In the following table, x=IP_300, IP_500 or IP_600, y is the key number. Note that
IP_300 parameters affect SoundPoint
affect SoundPoint
y=1-42
Attribute
key.x.y.function.prim
® ®
IP / SoundStation
Permitted Values
fontName_height_Uxx
00_UyyFF.fon OR
fontName_height_Uxx
00_UxxFF.fnt
Permitted
Values
positive
integer
®
IP 300, 301, 500, 501 and 600 key functions can be changed from the
®
IP 500 and 501 phones. IP 300: y=1-35; IP 500: y=1-40; IP 600:
Permitted
Values
Functions listed
below.
Copyright © 2005 Polycom, Inc.
IP
Default Interpretation
Null Defines the font file that will be
loaded from boot server during boot
up.
Note: When several
font.IP_600.x.names are defined, the
index x must follow consecutive
increasing order.
Default Interpretation
1 The time-out after which a key that is enabled
for scrolling will go into scrolling mode until the
key is released. Keys enabled for scrolling are
menu navigation keys (left, right, up, down
arrows), volume keys, and some context-spe-
cific soft keys. The value is an integer multiple
of 500 milliseconds (1=500ms).
®
IP 300 and 301 phones, and IP_500 parameters
Interpretation
Sets the function for key y on platform x.
Optimization
113