Using the Configuration Menu Functions
Using the Configuration Menus
The configuration menus can be operated using either the remote control or
the projector's control panel.
PROCEDURE
Press the [Menu] button on either the remote control
1
or the projector's control panel.
The main configuration menu appears.
Remote control
Select a main menu item.
2
If using the remote control, tilt the [ ] button up or down to
select a menu item.
If using the projector's control panel, press the [
button to select a menu item.
The sub-menu items vary depending on the item selected in the
main menu.
Video
Audio
Effect
Setting
User's Logo
Advanced1
Advanced1
Advanced2
About
Reset All
Confirm the selection.
3
If using the remote control, press the [Enter] button to confirm a
selection.
If using the projector's control panel, press the [Auto/Enter]
button to confirm a selection.
The cursor will be displayed in the sub-menu and settings can
then be made.
Startup Screen
Progressive
Color Adjustment
Rear Proj.
Ceiling
Standby Mode
Language
Reset
Select a sub-menu item.
4
If using the remote control, tilt the [ ] button up or down to
select a sub-menu item.
If using the projector's control panel, press the [
button to select a sub-menu item.
] or [
]
Startup Screen
Progressive
Color Adjustment
Rear Proj.
Ceiling
Standby Mode
Language
Reset
:
ON OFF
:
OFF
Video
Film/Auto
:
Color Temp.
RGB
Adjust
:
ON OFF
:
ON OFF
:
Network ON
Network OFF
Select [English]
Execute
:
ON OFF
:
OFF
Video
Film/Auto
:
Color Temp.
RGB
Adjust
:
ON OFF
:
ON OFF
:
Network ON
Network OFF
Select [English]
Execute
User's Guide
96
] or [
]