About" Menu - Epson EMP-7950 User Manual

Using the Configuration Menu Functions Using the Configuration Menu Functions

"About" Menu

• The "About" menu shows the setting details for the
current input signal.
• The "Lamp" item appears as "0H" for 0–10 hours, and
after that it appears in units of 1 hour.
Computer (Analogue RGB, Digital-RGB)/
Component Videog/RGB Video
Video Lamp (High Brightness)
Audio (Low Brightness)
Effect
Reset Lamp Timer
Setting
Source
User's Logo
Input Signal
Advanced1
Frequency
Advanced2
About
SYNC Polarity
Reset All
SYNC Mode
Resolution
Refresh Rate
[ ]: Select [ ]: Enter
Video (Composite Videog, S-Videog)
Video Lamp (High Brightness)
Audio
(Low Brightness)
Effect
Reset Lamp Timer
Setting
Source
User's Logo
Video Signal
Advanced1
Advanced2
About
Reset All
[ ]: Select [ ]: Enter
: 0H
: 0H
Execute
: Computer
: Auto
: H ---.---kHz
: V ---.---Hz
: H ------
: V ------
: ------
: ----x ----
: ---.-- Hz
[Menu]: Exit
: 0H
: 0H
Execute
: Video
: Auto(-----)
[Menu]: Exit
Sub-menu
Lamp Displays the cumulative lamp operating time for both "High
Brightness" and "Low Brightness".
•When the lamp warning period is reached, the display
characters appear in red.
Reset Initialises the lamp operating time. When this command is
Lamp selected, the cumulative lamp operating time is reset to the
Timer initial default value.
Source Displays the input source which is currently being
projected.
Input Displays the input signal settings.
Signal (Does not appear when the input source is Composite Video,
S-Video or EasyMP.)
Video Shows the video signal format.
Signal (Does not appear when the input source is Computer, RGB
video, Component Video or EasyMP.)
Frequency Displays the horizontal and vertical scanning frequencies.
(Does not appear when the input source is composite video
or S-video.)
SYNCg Displays the sync polarity.
Polarity (Does not appear when the input source is composite video
or S-video.)
SYNC Displays the sync attributes.
Mode (Does not appear when the input source is composite video
or S-video.)
Resolution Displays the input resolution.
(Does not appear when the input source is composite video
or S-video.)
Refresh Displays the refresh rate.
Rateg (Does not appear when the input source is composite video
or S-video.)
Function
User's Guide
94
Default
0H
-
-
-
-
-
-
-