Preventing Theft (Password Protect); When Password Protect Is Enabled; When "Power On Protect" Is Enabled (On) - Epson EMP-7950 User Manual

Preventing theft (Password Protect)

When the Password Protect function is activated, people who do not know the
password cannot use the projector to project images when the power is turned
on. Furthermore, the user's logo that is displayed on the background of the
screen cannot be changed. This is effective against theft.
When turning the projector's power on for the first time after the purchase, the
projection will start without entering a password. It is recommended that you
enable the Password Protect function promptly.

When Password Protect is enabled

When "Power ON Protect" is enabled (ON)

When the power is turned on for the first time after the projector's power
cable is connected to the electrical outlet, or when Direct Power On is
carried out, the following password entry screen will be displayed.
Password
Enter the password.
#Refer to the "User's Guide" for the operation.
[0-9]:Enter
Use the numeric buttons on the remote control to set the password.
Press the [Num] button on the remote control to enter the password.
If you press the [Num] button, it will light up and the remote control
buttons will change to numeric keypad mode so that you can enter
numbers.
If you press the [Num] button once more, it will stop lighting up and
numeric keypad mode will be cancelled.
If the correct password is entered, projection will then start.
Remote control
Numeric buttons
The buttons inside the box will switch
to numeric keypad mode while the
[Num] button is lit.
If you leave the power cable connected to the electrical outlet and turn the
projector's power on when it is in standby mode, projection will start
without the password entry screen appearing. The password entry screen
will only be displayed when the power is turned on for the first time after
the power cable has been disconnected and then reconnected. If Direct
Power On is set to "ON" and you are using a circuit breaker or similar to
centrally control the power, the password entry screen will be displayed the
first time the projector is turned on after the power supply is restored.
User's Guide
58