Height Correction - Epson EMP-7950 User Manual

Adjusting the Screen Image

Height Correction

When Automatic keystone correction and horizontal correction is carried
out, the height of the projected images will become shorter. Use the height
correction function to adjust the height of the projection area.
The height correction function is accessible from the configuration menu.
This cannot be set when vertical correction is carried out.
PROCEDURE
Press the [Menu] button on either the remote control
1
or the projector's control panel. Then select "Height"
from the "H/V-Keystone" sub-item of the "Keystone"
command in the "Setting" menu.
For details, refer to "Using the Configuration Menus"
Video
Audio
Effect
Auto Keystone
Setting V-Keystone
User's Logo
H-Keystone
Advanced1
Height
Advanced2
About
Reset All
[ ESC ]: Return [ ]: Select [
Keystone
: ON OFF
- +
: 32
+
0 -
:
+
-
: 0
]: Adjust [Menu]: Exit
Tilt the [ ] button on the remote control to the left or
2
right, or press the [ ] or [ ] buttons on the
projector's control panel to correct the height while
viewing the projected images.
Video Video
Audio udio
Effect Eff
Setting Setting
User's Logo User's Logo
Advanced1 Adv anced1
Advanced2 Adv anced2
About About
Reset All Reset All
p.96
[ ESC ]: [ ESC ]: Retur Return
When the adjustment is complete, press the [Menu]
3
button on the remote control or the projector's
control panel to close the configuration menu.
Keystone Keystone
Auto Keystone Auto Keystone : ON ON OFF OFF
V-Keystone V-Keystone : 32 32 - +
H-Keystone H-Keystone : 0 - +
+
Height Height : 48 -
[ ]: Select Select [ ]: Adjust Adjust [Menu]: [Men u]: Exit Exit
User's Guide
48