Compatible Computers; Installing And Uninstalling The Projector Software; Computers That Can Run Emp Monitor; Computers That Can Run Emp Networkmanager - Epson EMP-7950 User Manual

Monitoring and Controlling Projectors via a Network (for the EMP-7900)

Compatible Computers

Computers that can run EMP Monitor

Windows 98 SE/Me/NT4.0/2000 Professional/
Operating System*
XP Home Edition/XP Professional
Pentium MMX 166 MHz or higher
CPU
(Pentium II 233 MHz or higher recommended)
RAM 64 MB or more (128 MB or more recommended)
Free hard disk space 6 MB or more
XGAg
Display
16-bit colour or greater
* Macintosh computers are not supported.

Computers that can run EMP NetworkManager

Windows 98 SE/Me/NT4.0 (Service pack 6a, IE5.0 or
Operating System* later)/2000 Professional/XP/XP Home Edition/
XP TabletPC Edition
Pentium MMX 166 MHz or higher
CPU
(Pentium II 233 MHz or higher recommended)
RAM 7 MB or more (10 MB or more recommended)
Free hard disk space 250 KB or more
XGAg
Display
16-bit colour or greater
* Macintosh computers are not supported.
(1024 × 768) resolution or higher,
(1024 × 768) resolution or higher,

Installing and Uninstalling the Projector Software

The EMP Monitor and EMP NetworkManager software programs can be
installed separately from the accessory Projector Software CD-ROM as
required.
If using Windows 2000/NT4.0/XP, installation can only be carried out by a
user who is logged in as administrator.

Installing the software

PROCEDURE
Turn the power on for the computer and close all
1
applications that are currently running.
Insert the "Projector Software" CD-ROM into the
2
computer's CD-ROM drive.
The installer will start automatically.
A virus checking program window will appear, so
3
check the contents and then click "Next".
A software confirmation window will appear.
TIP
If the installer does not start running automatically, select "Run"
from the "Start" menu, then type "CD-ROM drive:\SETUP.exe" in
the window and click the "OK" button.
User's Guide
99