Paper Size And Priority Feed Chart (Metric Version) - Kyocera KM-3035 Operation Manual

Section 10 Reference Information

Paper Size and Priority Feed Chart (Metric version)

If the drawers do not contain paper that is of a size and orientation exactly the same as that of the received documents, the FAX will
automatically select the most appropriate paper for print out. The following chart indicates the order of priority for paper selection in such a
case.
Received Document Size
Order of
Selection
<Notes for this Chart>
* The top edge of the paper in these illustrations indicates the direction of feed for transmission or print out.
* FL refers to Folio size paper.
* If the same size of paper is set in more than one location, the upper drawer will have priority for paper feed.
* If the either of the Fixed Size or Fixed Cassette modes are selected in the Paper Feed Selection Mode setting, that setting will take precedent
over the order indicated here.
*1: Indicates that the Rotate Received Data function will be used.
*2: If the received image of Folio size documents is automatically reduced to fit onto the paper, it will be accomplished onto A4R size paper.
: Indicates that a received page will be split and printed onto 2 or more separate sheets of paper.
10-4